Related Manuals for Sullair LS-10 30HP 24KT
Summarization of Contents
Section 1 SAFETY
General Safety, PPE, and Pressure Release
Covers general safety, PPE, and pressure release precautions.
Hazard Prevention: Fire, Moving Parts, and Toxic Substances
Details hazards related to fire, moving parts, hot surfaces, and toxic substances.
Electrical Shock and Safe Lifting Procedures
Covers electrical shock hazards and safe lifting practices.
Entrapment Safety Precautions
Addresses entrapment hazards and safety measures.
Section 2 DESCRIPTION
Introduction and Compressor Unit Function
Introduces Sullair compressors, components, and unit function.
Cooling, Lubrication, and Discharge Systems
Explains the functional description of cooling, lubrication, and discharge systems.
Control System Functionality
Details functional operations of standard and Supervisor II control systems.
Air Inlet System and Instrument Panel
Describes the air inlet system and instrument panel functions.
Section 3 SPECIFICATIONS
Model Specifications and Lubrication Guide
Provides detailed model specs and lubrication guidance.
Application Guide and Change Recommendations
Outlines application advice and lubrication/filter change schedules.
Section 4 INSTALLATION
Mounting, Ventilation, and Cooling
Covers compressor mounting and ventilation/cooling requirements.
Piping, Fluid Level, and Electrical Prep
Details service air piping, fluid level checks, and electrical prep for standard models.
Electrical Prep and Motor Rotation Checks
Covers electrical prep for Supervisor II and motor rotation checks for both systems.
Section 5 OPERATION
General Operation and Standard Controls
Explains general operation and controls for standard electro-mechanical models.
Start-up, Shutdown, and Supervisor II Setup
Covers start-up, shutdown, and Supervisor II parameter setup procedures.
Supervisor II Controls and Procedures
Details the purpose of Supervisor II controls and output relays.
Supervisor II Start-up and Shutdown
Covers initial and subsequent start-up and shutdown procedures for Supervisor II.
Section 6 SUPERVISOR II
Supervisor II Introduction and Keypad Functions
Introduces the Supervisor II system and describes its keypad functions.
Supervisor II Status Displays and Indicators
Explains the status displays and lamp indicators on the Supervisor II panel.
Section 7 MAINTENANCE
General Maintenance and Schedules
Overview of maintenance, daily checks, and scheduled tasks.
Fluid, Filter, Separator, and Parts Procedures
Procedures for fluid, filter, separator maintenance, and parts replacement.
Standard Electro/Mechanical Troubleshooting
Troubleshooting guide for standard electro/mechanical compressor models.
Supervisor II Troubleshooting and Calibration
Troubleshooting guide for Supervisor II and calibration procedures.
Section 8 ILLUSTRATIONS AND PARTS LIST
Ordering Parts and Spare Parts
Procedures for ordering parts and a list of recommended spare parts.
Component Diagrams and Parts Lists
Illustrates and lists parts for motor, compressor, frame, cooler, and air inlet systems.
System Diagrams and Parts: Cooling, Discharge, Electrical
Diagrams and parts for cooling/lubrication, discharge, and control/electrical systems.
Instrument Panel and Decal Group Illustrations
Diagrams and lists of instrument panel components and decals.
Need help?
Do you have a question about the LS-10 30HP 24KT and is the answer not in the manual?
Questions and answers