Table of Contents
Related Manuals for Autonics VG-M04 -16E Series
Summarization of Contents
Product Instruction
Features
Lists the key features and capabilities of the VG series vision sensor.
Accessory and Sold Separately
Details included accessories and items available for separate purchase.
Ordering Information
Provides codes and specifications for ordering different models.
Unit Description
Describes the physical components and indicators of the vision sensor unit.
Connections
Power I/O Cable (M12 12-pin connector)
Explains the pinout and function of the M12 12-pin power and I/O cable.
Ethernet Cable (M12 8-pin/RJ45 connector)
Details the pinout and wiring for the Ethernet cable connection.
Installation
Installing vision sensor
Instructions for physically mounting and positioning the vision sensor.
Adjusting vision sensor focus
Procedure for adjusting the vision sensor's focus using the software.
Installing software
Guide for installing the Vision Master software on a PC.
Connecting vision sensor and PC
Steps for establishing network connection between the vision sensor and PC.
Vision Sensor Program [Vision Master]
Overview
Provides a general introduction to the Vision Master software and its capabilities.
Vision Master Work Flow
Outlines the typical workflow for using the Vision Master software.
Installation of Vision Master
Detailed steps for installing the Vision Master software on a computer.
Start and Exit
Instructions on how to start and properly exit the Vision Master program.
Vision Master Screen Layout
Describes the different sections and components of the Vision Master user interface.
Setting Menu
Details the various settings available within the Vision Master software.
Work Group
Manages inspection tasks, including adding, editing, and deleting works.
Inspection
Details how to start, stop, and monitor device inspection processes.
Inspection
Alignment
Aligns position and orientation of the target based on the registered target.
Brightness
Inspects the average brightness of the target within a defined pass range.
Contrast
Inspects the average contrast of the target based on registered contrast.
Area
Inspects the area of the target within a defined pass range.
Edge
Detects the presence of edges and their orientation within the ROI.
Shape comparison
Compares the shape of an object against a registered template.
Length
Measures the length between two detected edges based on a pass range.
Angle
Measures the angle between two detected edges within a pass range.
Diameter
Measures the diameter of a detected circle within a specified range.
Object counting
Counts the number of detected objects that meet specified criteria.
Color identification
Identifies objects based on their color by comparing registered and input colors.
Area of color
Measures the area occupied by a specific color within the ROI.
Object of color counting
Counts the number of detected objects that match a specific color.
Settings
Simulator
Allows registering work groups and testing inspections using sample images.
Device (Vision Sensor)
Guides on connecting and configuring the vision sensor for inspection.
Need help?
Do you have a question about the VG-M04 -16E Series and is the answer not in the manual?
Questions and answers