Table of Contents
Advertisement
Quick Links
OWNER'S /
OPERATOR'S
MANUAL
MODEL NO.'s
HPD-16 HSS/P
(S/N 4215 and above)
HPD-22Q HSS/P
(S/N 5501 and above)
HPD-26Q HSS/P
(S/N 1501 and above)
CAUTION
For Safe Operation
Read Rules And
Instructions Carefully
SI NO LEEINGLES, PIDA AYUDA
A AIGUIEN QUE SI LO LEA
PARA QUE LE TRADUZCA LAS
MEDIDAS DE SEGURIDAD.
THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD
1. Select an area for assembly that is clean and free of any
debris which might cause persons working on the
assembly to trip.
2. Do not lift heavy parts or assemblies. Use crane, jack,
tackle, fork trucks or other mechanical devices.
3. Preview the assembly instructions in your operator's
manual before proceeding further.
4. If the assembly instructions call for parts or assemblies to
be blocked up, use only blocking material that is in good
condition and is capable of handling the weight of the
assembly to be blocked. Also insure that the blocking
material is on a clean, dry surface.
5. Never put hands, or any part of body, under blocked up
assemblies if at all possible.
SKID STEER MOUNTED
HYDRAULIC POST DRIVERS
w/ Hydraulic Power Package
Safety Instructions
Tractor Preparation
Operating Instructions
CAUTION
BEFORE ATTEMPTING TO BEGIN ASSEMBLING THIS MACHINE
Assembly & Mounting
Maintenance
Repair Parts
6. After completing assembly, thoroughly inspect the
machine to be sure that all nuts, bolts, hydraulic fittings
or any other fastened assemblies have been thoroughly
tightened.
7. Before operating the machine, thoroughly read the
operation section of your operator's manual.
8. Before operating, read the maintenance section of your
operator's manual to be sure that any parts requiring
lubrication, such as gearboxes, are full, to avoid any
possible damage.
9. Before operating equipment – If you have any
questions regarding the proper assembly or
operation, contact your dealer or representative.
Advertisement
Table of Contents
Related Manuals for Worksaver HPD-16 MSS
Summarization of Contents
Safety Instructions and Guidelines
Model Numbers
Lists the specific model numbers covered by this manual.
Safety Rules and Warnings
Important safety rules and cautions for safe operation of the equipment.
Important Safety Information
Crucial safety directives for operating the equipment safely and preventing accidents.
Understand Signal Words
Explains the meaning of signal words like DANGER, WARNING, and CAUTION used in the manual.
Operational Safety
Outlines critical safety precautions during the operation of the post driver.
Maintenance Safety
Details safety procedures to follow when performing maintenance on the equipment.
Safety Signs
Instructions on identifying, understanding, and maintaining safety signs on the equipment.
General Safety Requirements
A comprehensive list of safety requirements to avoid accidents during operation.
Owner Information and Warranty
To the Owner
Welcome and essential information for the owner regarding manual usage and upkeep.
Retail Customer's Responsibility
Defines the responsibilities of the retail customer for safe operation, maintenance, and warranty.
Statement of Policy
Outlines the manufacturer's policy regarding product improvements and design changes.
Limited Warranty
Disclaimer of Warranties
Details the limitations and exclusions of implied warranties and consequential damages.
Warranty Exclusions
Lists conditions and circumstances under which the warranty does not apply.
Instructions and Assembly
Skid Steer Requirements and Preparation
Specifies the necessary skid steer unit requirements and preparation steps before assembly.
Packaging
Describes how the post driver is shipped and initial unpacking instructions.
Assembly & Mounting
Step-by-step guide for assembling and mounting the post driver attachment to the skid steer.
Hydraulic Connections
Details the correct procedures for connecting hydraulic hoses and fittings.
Lubrication
Provides guidance on lubrication points and procedures for maintaining the equipment.
Post Holder Mounting
Instructions for mounting the post holder attachment to the post driver.
Attachment to Prime Mover
Procedures for attaching the post driver to the prime mover (skid steer).
Removing the Post Driver
Steps for safely detaching the post driver from the prime mover.
Operating Instructions
Before You Start
Pre-operation checks and reading instructions before using the post driver.
Pre-Operation Checklist
A checklist of essential checks before operating the post driver.
Operation
Detailed steps and procedures for operating the hydraulic post driver.
Drive Posts Safely
Specific safety advice for driving posts efficiently and safely.
Service and Maintenance
Storing the Post Driver
Procedures for properly storing the post driver when not in use.
Maintenance and Adjustments
Covers routine maintenance tasks and adjustments for the equipment.
Hydraulic Cylinder Maintenance
Specific instructions for maintaining the hydraulic cylinder assembly.
Spring Replacement
Detailed steps for replacing the springs on different post driver models.
Skid Steer Post Driver Specifications
Technical specifications for different models of the skid steer post driver.
Troubleshooting Guide
Driver Does Not Drive Post
Solutions for issues where the post driver fails to drive a post.
Driving Ram Issues
Addresses problems related to the driving ram's movement and performance.
Post Veering Issues
Guidance on resolving problems where the post veers off-angle during driving.
Hydraulic Oil Overheating
Identifies causes and remedies for hydraulic oil overheating.
Parts Information
Post Holder Attachment Parts Drawing & List
Exploded view and parts list for the post holder attachment.
HPD-16 Parts Information
Drawings and lists of parts specific to the HPD-16 model.
HPD-22Q Parts Information
Drawings and lists of parts specific to the HPD-22Q model.
HPD-26Q Parts Information
Drawings and lists of parts specific to the HPD-26Q model.
Hydraulic Power Package Parts List
Comprehensive list of parts for the hydraulic power package.
Need help?
Do you have a question about the HPD-16 MSS and is the answer not in the manual?
Questions and answers