Mains Connection; Safety First - Martin Audio ICT300 User Manual

System controller & compact loudspeaker

Hide thumbs

Table Of Contents

Table of Contents

CONTENTS

The M1 is supplied with a captive mains lead with an integral U.K. BS1363

3 pin plug. Should the moulded plug be removed and another plug

substituted the cable must be re-wired as below.

GREEN/YELLOW

BROWN

BLUE

WARNING: The M1 Controller must always be operated with the mains

safety earth connected.

The M1 is supplied from the factory in either 100-120V or

200-240V versions

Mains voltage tolerance ±10% on each setting

Fuse: - type 'T' semi-delay 200mA (L) 100-120V

Fuse: - type 'T' semi-delay 100mA (L) 220-240V

NO ATTEMPT SHOULD BE MADE BY THE USER TO CHANGE THE

MAINS OPERATING VOLTAGE FROM THAT SUPPLIED, REFER TO

QUALIFIED PERSONNEL ONLY.

This equipment must be earthed.

It should not be necessary to remove any protective earth or signal cable

shield connections.

It is important that loudspeaker systems are used in a safe manner.

Please take some time to review the following points concerning safe use

of ICT300 compact loudspeakers.

Professional loudspeakers are capable of producing extremely high sound

levels and should be used with care. Hearing loss is cumulative and can

result from levels above 90dB if people are exposed for a long period.

Never stand close to loudspeakers driven at a high level.