Related Manuals for JRC JMA-3336
Summarization of Contents
Chapter 2 Scanner Installation
2.1 Selecting the Installation Position
Criteria for choosing the best location to install the radar scanner unit.
2.2 Installation Procedure
Steps and precautions for installing the scanner unit, including handling and mounting.
2.3 Connecting the Installation Cable
Instructions for connecting the installation cable to various scanner models.
Chapter 3 Display Unit Installation
3.1 Selecting the Installation Position
Guidelines for choosing the optimal installation location for the display unit.
3.2 Installation of the Display Unit
Procedures and considerations for physically mounting the display unit.
3.4 Installation of the Cable Between the Display Unit and the Scanner
Instructions for connecting the display unit to the scanner unit using a specific cable.
3.5 Connecting to the JRC's GPS Receiver
Steps for connecting a JRC GPS receiver to the system.
3.6 Connecting to the GPS Compass
Procedures for connecting JRC GPS compass units to the system.
3.12 Change the Fuse
Procedure for replacing fuses in the display unit for different scanner models.
Chapter 4 Adjust Menu Settings
4.1 Opening the Adjust Menu
How to access and navigate the Adjust Menu on the display unit.
4.2 Basic Adjustment
Performing fundamental adjustments for radar operation.
4.3 Radar Echo
Settings related to radar echo display and processing.
4.6 Scanner
Detailed settings and adjustments for the scanner unit.
4.7 I/F Device
Settings for interface devices like gyro, compass, and GPS.
4.9 GPS
Settings and configurations related to GPS receiver functionality.
4.11 Maintenance
Procedures for system maintenance, resets, and updates.
4.14 Error Alarm Mask
Configuration for masking or enabling specific error alarms.
Chapter 5 Noise Interference Measures
5.1 Shield of Devices
Measures to prevent noise emission from device components.
5.3 Installation Location
Considerations for choosing installation locations to minimize noise interference.
5.4 Grounding
Procedures for grounding equipment to prevent noise and ensure safety.
Appendix
Fig. A1 Exterior Drawing of Scanner Unit, Type NKE-2042
Technical drawing and dimensions of the NKE-2042 scanner unit.
Fig. A7 Exterior Drawing of Display Unit, Type NCD-2182 (1/2)
Technical drawing and dimensions of the NCD-2182 display unit (part 1).
Fig. A10 General System Diagram of Radar
Overview of the radar system components and their interconnections.
Fig. A11 Primary Power Supply Diagram, Type JMA-3300
Detailed power supply schematic for the JMA-3300 system.
Fig. A19 Interconnection Diagram of Display Unit, Type NCD-2182
Electrical interconnection diagram for the NCD-2182 display unit.
Need help?
Do you have a question about the JMA-3336 and is the answer not in the manual?
Questions and answers