Technical Specifications - Arcam FMJ MS250 Manual

Technical specifications

General
Power Requirements
Power consumption
Dimensions
Weight
Audio outputs
Analogue audio outputs
Output level
Frequency response
THD+N
Signal-to-noise ratio
Digital audio output (IEC958)
Video outputs
Composite video
S-Video
VGA
Accessories supplied
E&EO
NOTE: All specification values are typical unless otherwise stated.
Continual improvement policy
Arcam has a policy of continual improvement for its products. This means that designs and
specifications are subject to change without notice.
MS250
34
Within the range 115V to 230V AC
< 35 VA
435mm x 80mm x 350mm
net: 5.2kg; packed: 8.0kg
Four zones of stereo output on gold-plated phono sockets
2.2V rms at 0dB signal
20Hz to 20kHz (+0.1db, –0.5dB)
<0.005% for 1kHz 0dB signal,
measured 22Hz–22kHz, unweighted
105dB, measured 20Hz–20kHz, unweighted
PCM on gold-plated phono (coax) and TOSLINK (optical) sockets
1 x gold plated phono. 1V pk-pk in 75Ω
1 x 4-pin mini-DIN. Y 1V pk-pk in 75Ω, C 0.3V pk-pk in 75Ω
SVGA output (800 x 600 pixels, up to 16 million colours)
1 x 15-pin D-subminiature VGA connector
CR-425 Remote control
2 x AAA batteries
mains lead