Safety guidelines 8. Cleaning CAUTION ATTENTION Unplug the unit from the mains supply before cleaning. RISQUE DE CHOC ELECTRIQUE RISK OF ELECTRIC NE PAS OUVRIR The case should normally only require a wipe with a soft, damp, SHOCK DO NOT OPEN lint-free cloth.
12 minutes after the signal source is switched speaker Dolby Pro Logic or Dolby Digital system. off. Contact your Arcam dealer for more information. The signal detect feature is disabled by the supplied blank plug, or when a connection from the...
If both are on, minutes before reconnecting. If the fault cannot be cleared, overloads are more likely if low impedance speakers are unplug your amplifier and contact your Arcam dealer. connected. A80/P80...
Two amplifiers – one of these would be the A80 and the other an Arcam power amplifier (e.g. P80). Bi-wiring your loudspeakers Loudspeaker cables – two pairs of cables per loudspeaker or...
2 x AAA batteries E&OE Continual improvement policy NOTE: All specification values are typical unless otherwise Arcam has a policy of continual improvement for its products. stated. This means that designs and specifications are subject to change without notice. A80/P80...
This equipment should be packed in the original packing address and we will do our best to help you. and returned to the dealer from whom it was purchased, or failing this, directly to the Arcam distributor in the country of residence. On-line registration You can register your Arcam product on line at www.arcam.co.uk...
Need help?
Do you have a question about the DIVA P80 and is the answer not in the manual?
Questions and answers