Related Manuals for turck IM33-11EX-HI/24VDC
Summarization of Contents
About this safety manual
Target groups
Defines the intended audience for the safety manual, including their roles and responsibilities.
Explanation of symbols
Details the meaning of symbols used throughout the safety manual for clarity and safety.
Notes on devices
Device variants
Lists the different versions of the isolating transducers covered by this safety manual.
For your safety
Intended use
Describes the proper application and operational parameters for the isolating transducers in safety systems.
Obvious misuse
Highlights incorrect usage scenarios that should be avoided to maintain safety and device integrity.
Device specific information on safety applications
Safety function
Details the operational behavior of the device in relation to its safety function.
Safe state
Defines the specific safe state outputs the device will assume during fault conditions.
Characteristic values for IM33-... isolating transducers
Presents key safety characteristic values and failure data for the IM33 series.
Recurrent function tests
Outlines the procedures and intervals for periodic function testing of the device.
Installation and commissioning
Wiring diagrams
Illustrates the electrical connections for various device configurations.
Operation, maintenance and repair
Troubleshooting
Offers guidance for diagnosing and resolving issues with the device.
Maintenance
Describes the maintenance requirements and procedures for the device.
Decommissioning and withdrawal from service
Returning devices
Outlines procedures for returning devices, including decontamination requirements.
EXIDA FMEDA Report
Management summary
Provides a concise overview of the hardware assessment and FMEDA results for the products.
Purpose and Scope
Defines the objectives and scope of the hardware assessment report.
Failure Modes, Effects, and Diagnostic Analysis
Covers the FMEDA methodology and description of failure categories.
Methodology – FMEDA, Failure rates
Details the FMEDA methodology and how failure rates were determined.
Results of the assessment
Presents the findings and results from the FMEDA and safety assessment.
Isolating Transducers IM33-**(Ex)-Hi/24VDC Failure Rates
Specific failure rate data for the IM33 isolating transducers.
Analog Signal Transmitters IM35-**Ex-Hi/24VDC Failure Rates
Specific failure rate data for the IM35 analog signal transmitters.
Terms and Definitions
Defines key terms and acronyms used in the safety manual and assessment report.
Appendix 1: Proof Test Procedures
Outlines methods for detecting dangerous undetected faults through proof testing.
Appendix 2: Component Lifetime Impact
Analyzes how component lifetime affects the failure rate calculations.
Need help?
Do you have a question about the IM33-11EX-HI/24VDC and is the answer not in the manual?
Questions and answers