Related Manuals for Genie GS-3369DC
Summarization of Contents
Introduction
About this manual
Explains the purpose and scope of the operator's manual.
Product Identification
Details how to identify the specific machine using serial numbers.
Intended Use
Specifies the machine's intended purpose for lifting personnel and materials.
Bulletin Distribution and Compliance
Discusses the importance of safety bulletins and keeping contact information updated.
Contacting the Manufacturer
Provides information on how and why to contact Genie for support.
Transfer of Machine Ownership
Explains the process of updating ownership for important information.
Do Not Operate Unless
Lists essential conditions and knowledge required before operating the machine.
Safety Sign Maintenance
Describes how to maintain and care for safety signs on the machine.
Hazard Classification
Explains the meaning of hazard symbols, colors, and signal words used in the manual.
Symbol and Hazard Pictorials Definitions
Pictorial Definitions
Lists and defines various safety symbols and their meanings.
General Safety
Safety Alerts and Pictorials
Highlights key safety decals and their associated hazards and warnings.
Machine Safety Decals
Details specific safety decals and their locations on the machine.
Personal Safety
Personal Fall Protection
Addresses requirements and guidelines for personal fall protection equipment (PFPE).
Work Area Safety
Electrical and Tip-Over Hazards
Covers electrocution risks and factors leading to machine tip-overs.
Platform Operation and Stability
Details safe practices for platform use, wind, and slopes.
Operational and Crushing Hazards
Addresses crushing risks, slope operation, and collision avoidance.
Component and Battery Safety
Covers hazards related to machine components, batteries, and electrical safety.
Legend
Component Identification
Illustrates and lists numbered components of the aerial work platform.
Controls
Ground Control Panel
Explains the functions of buttons and switches on the ground control panel.
Platform Control Panel Functions
Details the buttons, switches, and joystick operations on the platform control panel.
Inspections
Pre-operation Inspection
Outlines the visual inspection process before operating the machine.
Function Test Procedures
Provides step-by-step instructions for testing all machine functions.
Workplace Inspection
Guides the operator on inspecting the work area for safety hazards.
Decal Inspection
Details how to inspect machine decals for legibility and placement.
Operating Instructions
Emergency Procedures
Covers emergency stop, lowering, and overload recovery procedures.
Machine Operation
Details how to operate outriggers, steer, and drive the machine.
Slope Operation and Overload
Explains safe driving on slopes and platform overload conditions.
Battery and Charging
Provides instructions for battery maintenance, charging, and level indicators.
Transport and Lifting Instructions
Securing for Transit
Outlines procedures for securing the machine to a transport vehicle.
Lifting Procedures
Details safe practices and center of gravity for lifting the machine.
Maintenance
Hydraulic Oil Level Check
Explains how to check and maintain the hydraulic oil level.
Battery Maintenance
Provides guidelines for checking battery condition and connections.
Specifications
GS-2669DC Specifications
Lists detailed technical specifications for the GS-2669DC model.
GS-3369DC Specifications
Lists detailed technical specifications for the GS-3369DC model.
GS-4069DC Specifications
Lists detailed technical specifications for the GS-4069DC model.
Need help?
Do you have a question about the GS-3369DC and is the answer not in the manual?
Questions and answers