Related Manuals for Vetus D-LINE VD6.170
Summarization of Contents
Safety Measures
Warning Indications
Explains the meaning and use of various warning symbols within the manual.
Preventing Fire and Explosion
Provides critical safety guidelines to prevent fire and explosion hazards.
Prevention of Injury
Lists essential precautions to avoid personal injury during operation and maintenance.
When Problems Occur
Offers guidance on addressing common engine malfunctions and sudden stops.
Introduction
Engine Identification
Details on engine data tags, serial numbers, and part identification for D4/D6 models.
Controls and Panels
Overview of control panel instruments, gauges, and the operation of the control lever.
First Commissioning
Initial Setup and Fluid Filling
Procedures for initial engine setup, filling oil, gearbox, and cooling systems.
Fuel, Preparations, and Test Run
Guidance on fuel, pre-start checks, test runs, and sea trials.
Use
General Guidelines
Recommendations for optimal engine performance and longevity.
Starting and Cruising
Detailed instructions for starting the engine and operating during cruising.
Stopping the Engine
Correct procedures for safely stopping the engine after operation.
Maintenance
Introduction and Schedule
Overview of maintenance guidelines and a detailed schedule of tasks.
Daily Checks
Procedures for daily checks of engine oil and coolant levels.
Fuel System Maintenance
Draining water from the fuel filter and fuel system.
Engine Oil and Filter Service
Instructions for engine oil and filter changes at specified intervals.
Cooling System Maintenance
Draining the charge-air cooler and coolant replacement procedures.
Battery, Cables, and Connections
Safety and maintenance procedures for the battery system.
Gearbox Maintenance
Procedures for checking and changing gearbox oil.
Fuel Filter Replacement
Steps for replacing the fuel filter element.
Belt and Pump Checks
Inspection of V-belts and the raw water pump.
Air Filter and Starter Checks
Procedures for air filter replacement and checking starter motor/alternator.
Valve Clearance and Coolant Replacement
Checking valve clearance and replacing coolant at scheduled intervals.
Cleaning Heat Exchanger and After Cooler
Instructions for cleaning heat exchanger and after cooler components.
Lay-up / Winter Storage Procedure
Storage Preparation Overview
Lists inspections and maintenance tasks required for long-term storage.
System Protection
Procedures for corrosion protection, fuel, and lubrication systems during storage.
Cooling Systems and Electrical
Preparing fresh water cooling, raw water cooling, and electrical systems for storage.
Recommissioning After Lay-up or Winter Storage
Pre-Start Checks
Essential inspections and maintenance tasks before recommissioning the engine.
System Reconnection and Checks
Procedures for recommissioning fuel, cooling, lubrication, and electrical systems.
Operational Verification
Checking engine for leaks and verifying instruments and controls.
Troubleshooting
General Advice
General guidance on identifying and resolving engine faults.
Fault Finding Table
A comprehensive table listing common faults and their remedies.
Technical Data
Engine Specifications
Detailed technical specifications for various engine models.
Gearbox and Torque Settings
Specifications for gearbox options and recommended torque wrench settings.
Operating Media
Fuel and Biodiesel
Information on fuel quality grades, winter-grade fuel, and biodiesel usage.
Lubricating Oil and Coolant
Recommendations for engine oil viscosity, quality, and coolant preparation.
Wiring Diagrams
Engine Wiring
Electrical wiring schematics for the engine systems.
Panel Wiring
Wiring diagrams for control panels and their interconnections.
Overall Dimensions
VD4 Models
Dimensional drawings and measurements for VD4.120 and VD4.140 engines.
VD6 Models
Dimensional drawings and measurements for VD6.170 and VD6.210 engines.
Need help?
Do you have a question about the D-LINE VD6.170 and is the answer not in the manual?
Questions and answers