Table of Contents
Related Manuals for Helmer HLR105-GX
Summarization of Contents
About this Manual
Intended Audience
Identifies the target readers of the operation manual.
Model Reference
Explains how model numbers correspond to refrigerator series and capacity.
Intended Use
Specifies the intended applications for Helmer refrigerators.
Safety Symbols and Precautions
Explains safety symbols used in the manual and unit labels.
Avoiding Injury
Provides critical warnings and precautions to prevent personal injury.
General Recommendations
Offers general advice for refrigerator use and product loading.
Installation
Location
Guidelines for selecting an appropriate installation location for the refrigerator.
Placement and Leveling
Instructions for positioning and ensuring the refrigerator is level.
Stacked Undercounter Units
Procedures for safely stacking multiple undercounter units.
AC Power Cord
Guidance on connecting the refrigerator to a power source.
Temperature Probes
Details on filling and placing temperature probe bottles for accurate readings.
Chart Recorder (if included)
Instructions for setting up and operating the optional chart recorder.
i.Series® Operation
Initial Power-up
Steps for powering on the i.Series refrigerator for the first time.
Operation
Overview of the i.C³ interface and basic operation.
Change Temperature Setpoint
Procedure for adjusting the refrigerator's temperature setpoint.
Set Alarm Parameters
How to configure the alarm settings for temperature and other events.
Active Alarms
Explanation of various active alarms and their meanings.
Mute Active Alarms
Instructions on how to temporarily silence audible alarms.
Light Operation (optional)
How to control the internal LED lighting.
i.Series® Access Control (Optional)
Setup
Steps to configure user accounts and access permissions.
Open Refrigerator with Access Control
How to unlock and open the refrigerator using the access control system.
Horizon Series™ Operation
Initial Power Up
Steps for powering on the Horizon Series refrigerator.
Display Minimum and Maximum Monitor Temperature Recordings
How to view recorded min/max temperatures and timer data.
Set Parameter Values
Guide to adjusting various operational parameters like temperature units.
Set Temperature Units
Procedure for changing temperature display units between Celsius and Fahrenheit.
Set Alarm Setpoints (Parameters)
Instructions for configuring high and low temperature alarm limits.
Temperature Calibration Offsets
Information on temperature calibration offsets and their purpose.
Horizon Series™ Access Control (Optional)
Setup
Steps for programming user codes and managing access control.
Product Specifications
Operating Standards
Details the environmental conditions for unit operation.
Compliance
Safety Compliance
Lists safety certifications and directives the device complies with.
Environmental Compliance
Outlines environmental regulations and disposal guidelines.
Appendix A: Parts
i.Series Parts
Lists and identifies component parts for the i.Series models.
Appendix B: Parts
Horizon Series Parts
Lists and identifies component parts for the Horizon Series models.
Need help?
Do you have a question about the HLR105-GX and is the answer not in the manual?
Questions and answers