Setup; Setting The Current Time (24-Hour Display) - Denon RCD-CX1 Owner's Manual

Setup

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
ON/STANDBY
ON/STANDBY
[MENU/SET]
[2/u]
[8/i]
[TIME/DISPLAY]
Setting the Current Time
(24-Hour Display)
BUTTON
<BUTTON>
GExampleH Setting the current time to 10:15 am
[BUTTON]
1
ON/STANDBY
Press
2
Press and hold in
The time is displayed.
3
Press and hold in
mode.
"TIME Adj" is displayed for about 2 seconds.
4
[2/u]
Use or
5
[MENU/SET]
Press
The "minutes" display fl ashes.
6
[2/u]
Use or
[5/ENTER]
7
[MENU/SET]
Press
The current time is set, and the normal display reappears.
to turn the power on.
[TIME/DISPLAY]
.
[MENU/SET]
to enter time setting
TIME Adj TIME Adj
[8/i]
to set the "hours".
10:00 10:00
[5/ENTER]
or .
10:00 10:00
[8/i]
to set the "minutes".
10:15 10:15
[5/ENTER]
or .
n Checking the current time when the power is on
[TIME/DISPLAY]
Press and hold in .
Press once more and the display returns to its original condition.
n Checking the current time when the power is set
to standby
[TIME/DISPLAY]
Press .
Press once more, and the standby display is resumed.
Displaying the time when the power is set to standby consumes
electricity. To reduce electric consumption, turn the time display off.
NOTE
The time cannot be set when in the standby mode. Turn on the power
fi rst.
ENGLISH