Panduit VS-AVT-C02-L10 Instruction Manual

Models: VS-AVT-C02-L03, VS-AVT-C02-L03A, VS-AVT-C02-L03E, VS-AVT-C02-L10,
© Panduit Corp. 2018
The VeriSafe Absence of Voltage Tester is a permanently-mounted tester that is used to verify a circuit is
de-energized prior to opening an electrical enclosure. Once installed, a push of a button enables qualified
electrical workers to verify the absence of voltage and see an active indication when the absence of voltage is
confirmed. The Indicator Module is designed for a 30-mm notched panel knockout and the Isolation Module can
be mounted to DIN rail or surface mounted using screws.
TO REDUCE THE RISK OF INJURY, USER
MUST READ INSTRUCTION MANUAL
North America Tech Support:
techsupport@panduit.com
Tel: 1-866-405-6654
EU Tech Support :
emeatoolservicecenter
@panduit.com
Tel: +31-546-580-452
Fax: +31-546-580-441
VeriSafe AVT
Absence of Voltage Tester
Instruction Manual
VS-AVT-C08-L10, VS-AVT-C08-L10A, VS-AVT-C08-L10E
NOTE: In the interest of higher quality and value, Panduit products are
continually being improved and updated. Consequently, pictures may vary
from the enclosed product.
NOTE: Updates to this Instruction Manual may be available. Check
www.panduit.com for the latest version of this manual.
www.panduit.com
Original Instructions
Asia Pacific Tech Support:
TechSupportAP@ panduit.com
Telephone:
Singapore: 1-800-Panduit (7263848)
Australia: 1-800-Panduit (7263848)
Korea: 02-21827300
B21052
Rev: 08 7-2018