Related Manuals for ElektroPhysik MiniTest 735
Summarization of Contents
First Steps
Insert batteries and connect sensor
Instructions for installing batteries and connecting the sensor.
Switch-ON and take readings
Procedure for powering on the gauge and performing the first measurement.
User Interface
Switch-ON and Start screen
Description of the initial screen and sensor selection upon startup.
Measure Mode Screen
Explanation of the display elements and information shown during measurement.
Menus
Overview of the hierarchical menu structure for device settings and functions.
Measuring
Important Notes on Coating Thickness Measurement
Key principles and factors affecting coating thickness measurement accuracy.
Necessary Settings
Configuration steps required before taking measurements, focusing on batch settings.
Preparing Measurement
Steps involved in preparing the gauge for measurement, including calibration.
Taking readings
Detailed procedures for taking measurements with different methods and stands.
Errors during measurement
Information on common errors and how to avoid them.
Measurement on hot surfaces (HT mode)
Guidelines for using high-temperature sensors for measurements on hot surfaces.
Calibration
General remarks
Fundamental principles and best practices for accurate calibration.
Calibration methods
Description of various calibration methods available for different applications.
Blasted and rough surfaces
Specific calibration procedures tailored for rough or blasted surfaces.
How to calibrate
Step-by-step instructions for performing manual and predefined calibrations.
Statistics / Statistical Evaluation
View statistics
Accessing and interpreting statistical data, including block statistics.
View single readings
Displaying individual recorded readings and their details.
Statistical values / Print-out and data transfer to a PC
Transferring readings and statistics to a PC or printer.
Delete readings of a batch
Procedure for deleting all readings within a selected batch.
Delete a current reading
How to delete a single reading immediately after acquisition.
Main menu
General remarks
Overview of the main menu structure and access to submenus.
Data base
Accessing and managing stored measurement batches.
Bluetooth
Enabling and managing Bluetooth connectivity for data transfer.
Display
Adjusting display backlight and contrast settings.
SIDSP®
Configuring measuring modes (normal, fast, high precision).
Time / Date
Setting and using the gauge's internal clock.
Language
Selecting the user interface language.
Measuring unit
Choosing between metric and imperial units.
Switch off mode
Configuring the automatic power-off feature to save battery.
Signal light
Setting the visual indicator for measurement results.
Signal tone
Configuring audible alerts for readings and key presses.
Sensor data
Viewing specific information about the connected sensor.
Gauge data
Viewing general specifications of the gauge unit.
Data output / Data transmission
Print out data
Sending measurement data to a MiniPrint 7000 printer.
Data transmission to a PC (terminal program)
Transferring data to a PC using terminal software.
Data transmission to a PC (MSoft 7)
Using MSoft 7 software for interactive data transmission.
Additional Functions
Initializing
Procedure for initial setup, including language, reset, power source, and button delay.
Special functions
Quick access to functions like hardcopy, backlight, and unit switching.
Readjusting the factory zero-point
Detailed steps for recalibrating the zero point to ensure accuracy.
Quick reference
Synopsis
Hierarchical overview of the gauge's menu structure and functions.
How to create a Batch
Step-by-step guide for creating and configuring a new data batch.
Care and Maintenance
Care
Instructions for cleaning the gauge and accessories, with cautions.
Using NiMH rechargeable batteries
Guidelines for optimal service life and handling of rechargeable batteries.
Maintenance
Information on general maintenance and authorized repair services.
Technical Data
Gauge specifications
Detailed technical specifications for MiniTest 725, 735, and 745 models.
Sensor specifications
Technical data and characteristics for various sensor types.
Delivery schedule
List of standard accessories and components included with each gauge model.
Annexe
Error messages and remedy
Troubleshooting guide for common error messages and their causes/solutions.
Statistical Terms
Definitions and explanations of statistical terms used in the manual.
Safety Notes
Important safety precautions and warnings for operating the device.
Declaration of Conformity
Statement confirming the product's compliance with relevant directives.
After Sales Service
Information on customer support, repairs, and contact details.
Need help?
Do you have a question about the MiniTest 735 and is the answer not in the manual?
Questions and answers