ElektroPhysik SmarTest Quick Start Manual

ElektroPhysik
Short Instructions
for
S m a r T e s t
Wireless Coating Thickness Sensor
Find Quality Products Online at:
Scope of Delivery
•
SmarTest
•
Calibration set with calibration foils and ref-
erence zero test plate(s)
•
USB charger with Micro USB cable
•
Operating manual
•
Manufacturer's certificate
•
Storage case
•
Hand strap
Using the Product
Charging the SmarTest Unit
SmarTest comes with a lithium-ion battery. Prior to
first use, the battery must be charged using the USB
charger and the Micro USB cable supplied with the
gauge.
Connection for charger;
interface
Connection for
hand strap Adapter
ON/OFF button
Installing the SmarTest APP via "Google Play
Store" on your Mobile Device
Use a QR code reader to scan the below QR code.
The SmarTest App will be shown in the "Google
Play Store". Select "Install".
As an alternative, you can select "Play Store" on the
Apps screen of your mobile device.
GlobalTestSupply
www.
Enter "Smartest" in the keyword search. Then select
the SmarTest App from the list and press "install".
Connecting SmarTest to your Mobile Device
The Bluetooth connection from the SmarTest to
your mobile device (smartphone, tablet) must be es-
tablished once.
Switch on the SmarTest. Press ON/OFF-key until
the Green LED lights up and the LED starts flashing
alternately between green and red.
Select "Settings" from the Apps screen of your mo-
bile device followed by „Bluetooth ON". Activate
Bluetooth, e.g. by sliding the Bluetooth switch to the
right. Then select "scan". Recognized devices will
be listed accordingly. Select your SmarTest device
from the list for connecting, e.g. S131334 (S+Serial
Sensor
number).
No Bluetooth authorization will be required. Smar-
Test is now connected to your mobile device and
shown on the list of "Paired devices". SmarTest is
now ready for use.
How to take Readings:
Switch on the SmarTest. The LED starts flashing al-
ternately between green and red.
Select "SmarTest" from the Apps screen to open the
SmarTest App. Your mobile device will automati-
cally connect to the SmarTest wireless sensor via
Bluetooth. The green SmarTest LED starts flashing
at intervals of 3 seconds.
.com
sales@GlobalTestSupply.com