Table of Contents
Related Manuals for KERN PNS 12000-1
Summarization of Contents
Technical Data
Dimensions
Physical dimensions of the balance models, crucial for installation and space planning.
Appliance Overview
Keyboard Overview
Details the function of each key on the balance's control panel for user interaction.
Overview of Display
Explains the meaning of various symbols and indicators displayed on the balance screen.
Basic Instructions
Intended Use
Defines the proper applications and purpose for which the balance is designed.
Improper Use
Outlines incorrect or unsafe ways to operate the balance, preventing damage or malfunction.
Warranty
Details the terms and conditions under which warranty claims are valid or voided.
Monitoring of Test Resources
Guidelines for regular checks of measuring properties and testing weights for accuracy.
Basic Safety Precautions
Pay Attention to Operation Manual Instructions
Emphasizes the importance of carefully reading and following all instructions in the manual.
Personnel Training
Specifies that only trained personnel should operate and maintain the weighing equipment.
Transport and Storage
Testing Upon Acceptance
Instructions for checking the appliance for damage immediately upon receiving it.
Packaging and Return Transport
Procedures for safely packing the balance for transport or return to prevent damage.
Unpacking, Setup and Commissioning
Installation Site and Location of Use
Guidance on selecting an appropriate location to ensure accurate and reliable weighing results.
Unpacking and Scope of Delivery
Steps for carefully removing the balance from its packaging and verifying all included items.
Assemble Windshield
Detailed instructions for assembling the windshield component on specific balance models.
Assembly, Placing and Levelling
Procedures for correctly assembling, placing, and levelling the balance for optimal performance.
Mains Connection
Instructions on how to safely connect the balance to the mains power supply for operation.
Initial Commissioning
Steps to follow for the initial setup and activation of the balance upon first use.
Connection of Peripheral Devices
Guidance on connecting external devices like printers or PCs to the balance's data interface.
Adjustment
Explains the process and importance of adjusting the balance for accurate measurements based on location.
Verification
Information regarding the official verification process required for certain commercial applications.
Basic Operation
Start-up
Instructions on how to power on the balance and initiate its operation sequence.
Switch into Stand-by Mode
How to put the balance into a low-power stand-by mode and resume operation quickly.
Zeroing
Procedure to reset the balance to zero before weighing to ensure accurate results.
Simple Weighing
Step-by-step guide for performing basic weighing operations to obtain a weight measurement.
Unity Change
How to switch between different available weighing units (e.g., grams, kilograms, pounds).
Weighing with Tare
Instructions on how to subtract the weight of a container to measure the net weight of the sample.
Menu Navigation and Settings
Menu [Function] Navigation
Explains how to access and navigate the primary function menu of the balance.
Menu Overview [Function]
Provides a comprehensive list and description of the available menu items and their factory settings.
Menu [Function2] Navigation
Details how to access and use the secondary function menu for advanced settings.
Applications
Parts Counting
Guide on using the balance to accurately count a large number of small items based on average piece weight.
Percent Determination
Instructions for performing percentage calculations relative to a reference weight.
Weighing with Tolerance Range
How to set upper and lower limits for weighing to ensure samples fall within specified tolerances.
General Functions
Zero-tracking
Explanation of the automatic zero-tracking function for maintaining zero point stability.
Settings for Stability and Response
How to adjust balance parameters to optimize stability and response time for different environments.
Show Software Status
Procedure to view the current software version and status of the balance.
Automatic Display Backlight Switch-off
Instructions on enabling automatic display backlight turn-off to save power.
Setting Date and Time
Guide for setting the current date and time on the balance for accurate logging.
Set Date Format
How to configure the display format for the date (e.g., DD.MM.YY, MM.DD.YY).
RS232C Interface and Connectivity
General Hints for RS232C Interface
Basic information and requirements for connecting peripheral devices via the RS232C interface.
Printer Operation
Instructions for connecting and operating a printer with the balance for printing data logs.
Data Output
Information on configuring data transmission formats and understanding data output structures.
Remote Control Instructions
Commands and procedures for controlling the balance remotely via an interface.
Servicing, Maintenance, and Disposal
Cleaning Procedures
Proper methods and recommended cleaning agents for maintaining the balance.
Servicing and Maintenance
Guidelines for authorized service technicians regarding maintenance and repair procedures.
Disposal Guidelines
Instructions for the environmentally sound disposal of the balance and its packaging according to regulations.
Need help?
Do you have a question about the PNS 12000-1 and is the answer not in the manual?
Questions and answers