To Install For Rear Projection - HP Mp3130 - Digital Projector XGA DLP User Manual

Installing Permanently

To install for rear projection

1. Place the projector 1.2 to 12 m (4 to 40 ft) behind a translucent screen that is
designed for rear projection.
See "To set up on a table" on page 19 or "To install on the ceiling" on page 55 for
more instructions.
2. Open the on-screen menu and select Setup > Projector position. Then select
Rear Table or Rear Ceiling from the drop-down list.
56 User's Guide