Installing For Rear Projection; Locking The Projector - HP mp2220 Series User Manual

Installing for rear projection

1. Place the projector 1.5 to 10 m (5 to 33 ft) behind a translucent screen that is designed for
rear projection.
See "Setting up the projector" on page 13 for more instructions.
Press enter, , , , go to Setup > Picture orientation. Then select Rear Normal.
2.

Locking the projector

The projector includes a built in slot to secure the projector with a cable and lock (such as the
Kensington MicroSaver lock system, available at many computer stores).
1. Wrap the cable around a secure object, such as a table leg. Loop the cable to create a slip
knot around the stationary object, and be sure it cannot slip off.
Insert the lock
2.
48 Installing Permanently
into the hole and twist the key
1
.
2