Making Basic Adjustments; To Aim The Projector - HP Mp3130 - Digital Projector XGA DLP User Manual

Making Basic Adjustments

This section provides instructions on making basic adjustments to the projector.
■
"To aim the projector" on page 29
■
"To adjust the focus and zoom" on page 30

To aim the projector

✎
Whenever you press the tilt button to aim the projector, the supports pop out from the
base and provide extra stability.
■
To raise the projected picture on the screen, press the tilt button
the supports to pop out
3
angle
■
To lower the projected picture, press the tilt button while lowering the front of the
projector. Release the tilt button to lock the adjustment.
■
To store the projector, press the tilt button and lower the projector onto the base,
then release the tilt button. Push the supports into the base.
When you tilt the projector up or down, the sides of the picture might become slanted.
However, the projector automatically adjusts the picture, so the sides are vertical. To
fine-tune this adjustment, see "To adjust the shape of the picture" on page 35.
User's Guide
2
, and lift the front of the projector to the desired display
. Release the tilt button to lock the adjustment.
Setting Up
1
, which causes
29