Table of Contents
Related Manuals for Lombardini 3LD 451/S
Summarization of Contents
Maintenance and Refuelling
Recommended Oil
Specifies recommended engine oils for service.
Capacities in Liters
Details fluid capacities for fuel, oil sump, and air filter.
Rating
Information on oil viscosity grades based on temperature.
Disassembly and Reassembly Procedures
Flywheel Removal and Installation
Procedure for removing and reattaching the flywheel.
Starting Pulley Installation
Steps for installing the starting pulley correctly.
Valve and Rocker Arm Clearance Adjustment
Procedure for setting valve clearance.
Head Overhaul
Instructions for cylinder head removal, reassembly, and gasket use.
Cylinder and Piston Servicing
Details on cylinder wear checks, piston fitting, and ring clearances.
Camshaft Installation and Timing
Procedures for camshaft installation and timing checks.
Lubrication Circuit
Oil Pump Servicing
Checks and tightening for the oil pump assembly.
Oil Filter Cartridge Replacement
Components and features of the oil filter cartridge.
Oil Pressure Check and Regulation
Procedures for checking and adjusting oil pressure.
Fuel and Injection Circuit
Fuel Filter Installation
Details on the fuel filter inside the tank.
Injection Pump Assembly and Adjustment
Procedures for assembling and adjusting the injection pump.
Injector Servicing and Setting
Instructions for injector installation, setting, and checks.
Advanced Injection Setting
Procedure for static advanced injection adjustment.
Electric Circuit Diagrams and Components
Ignition System Diagram
Diagram of the 12V 14A electrical ignition system.
Alternator Specifications and Performance
Details on the 12.5V 14A alternator and its recharge curve.
Electric Equipment Details
Voltage Regulator Functionality
Checks and procedures for the voltage regulator.
Starting Motor Specifications
Details and distance for Bosch DW(L) 12V 1.1KW starting motor.
Engine Adjustments
Idle Speed Adjustment (Minimum RPM)
Procedure to set the engine's minimum idle speed.
Peak RPM Adjustment
Procedure to set the engine's maximum idle speed.
Injection Pump Delivery Adjustment
Adjusting injection pump delivery for optimal performance.
Upkeep and Storage Procedures
Temporary Engine Protection
Steps for protecting engines stored for 1-6 months.
Permanent Protection for Long Storage
Instructions for protecting engines stored for over 6 months.
Preparation for Setting to Work
Procedure for preparing a stored engine for operation.
Need help?
Do you have a question about the 3LD 451/S and is the answer not in the manual?
Questions and answers