Table of Contents
Advertisement
Quick Links
Presence detector
compact passage KNX
Art. Nr. 201 9 290
D
Bedienungsanleitung
F
Notice d´utilisation
GB
Installation manual
Manual de instrucciones
E
Istruzioni per l'uso
I
Gebruikershandleiding
NL
Bruksanvisning
S
Bruksanvisning
N
Käyttöohje
FIN
Betjeningsvejledning
DK
2
24
46
68
90
112
134
156
178
200
Advertisement
Table of Contents
Related Manuals for Theben compact passage KNX
Summarization of Contents
Function and performance characteristics
Switching Mode
Describes how the lighting switches on/off based on presence and brightness levels.
Constant Light Control Mode
Explains maintaining a constant brightness level using automatic or manual control.
Fitting and connection
Presence detection
Details the ideal mounting height and detection range parameters for presence detection.
Light measurement
Explains how the detector measures artificial and daylight for lighting control.
Start-up procedure
Settings
Information on adjusting settings using ETS or a management remote control.
Programming Mode
Methods to select programming mode via button or remote control.
Lighting Settings (recommended)
Guidance on setting brightness, brightness difference, and switch-off delay times.
Presence settings
Configuration options for presence detection including switch-off and switch-on delay times.
Switch-off delay time presence
Describes settings for presence detection switch-off delay time without self-learning.
Switch-on delay time presence
Explains delaying the KNX telegram for detected movement by a set value.
Switch-on behaviour
Details the detector's start-up phase and normal operation behaviour.
Examples
One Detector, Two Lighting Rows
Illustrates a setup with one detector controlling two lighting rows in master mode.
Two Detectors, One Lighting Row
Describes master-slave configuration with two detectors for one lighting row.
Two Detectors, Two Lighting Rows
Details a setup with two detectors managing two separate lighting rows.
Need help?
Do you have a question about the compact passage KNX and is the answer not in the manual?
Questions and answers