Table of Contents
Related Manuals for Yamaha PGX1
Summarization of Contents
FCC Information (U.S.A.)
Important Notice: Do Not Modify This Unit
Critical warning against unauthorized modifications to the unit.
Important Connection and Usage Guidelines
Instructions for connecting accessories and using shielded cables.
Product Compliance and Interference
Details product testing, FCC compliance, and measures to address interference.
Safety Precautions
General Warnings and Cautions
Basic precautions to avoid injury, death, fire, or damage from electrical hazards, water, and environment.
Abnormality Detection and Response
Steps to take if the device shows unusual signs like smoke, damage, or sound loss.
Location-Specific Cautions
Advice on placing the device in stable locations and avoiding corrosive environments.
Handling Cautions
Device Handling Procedures
Precautions against inserting objects, applying excessive force, or pulling cables.
Notices and Information
Handling and Maintenance Guidelines
Instructions for device care, cleaning, and avoiding environmental damage.
Technical Information and Disposal
Details on Dante, disposal, manual content, and company trademarks.
Introduction and Product Overview
Introduction
Welcome and purpose of the installation manual for PGM1/PGX1 units.
Key Features
Highlights networking capabilities, message playback, and system integration with MTX/MRX.
Required Equipment
Lists necessary hardware like PoE injectors, switches, and screwdrivers for setup.
PGM1 Top Panel Controls
Component Descriptions
Details of the mic input, zone/message buttons, indicators, PTT, and labels on the top panel.
PGM1 Rear Panel Controls
UNIT ID and DIP Switch Settings
Explanation of UNIT ID rotary switch and DIP switches 1-3 for system configuration.
PGM1 Rear Panel DIP Switches
Advanced DIP Switch Functions
Detailed configuration options for DIP switches 4-8 for UNIT ID and IP settings.
PGM1 Bottom Panel Connectors
Connectors and Indicators
Description of Dante/NETWORK connector, SYNC/LINK/ACT indicators, and dedicated connector.
PGX1 Controls and Connectors
Top Panel Controls
Details of zone/message buttons, indicators, and labels on the PGX1 top panel.
Bottom Panel Connector
Description of the 8-pin dedicated connector on the PGX1 bottom panel.
PGM1 Initialization Procedure
Factory Reset Process
Step-by-step guide to returning the PGM1 unit to its factory-set state.
Connecting PGM1 to MTX/MRX System
System Setup and Priority Mic
How to connect PGM1/PGX1 units, system limits, and priority mic operation.
Connection Examples and Diagrams
Visual guides for small and large system configurations using PGM1 units.
Connecting the PGX1 Unit
Step-by-Step Connection Guide
Instructions for physically connecting a PGX1 unit to a PGM1 unit using the provided cable and bracket.
Indicator Status and Operation
Status Indicator Meanings
Explains the different states (lit/flashing) of the status indicator and their meanings.
Operation Diagram
Visual representation of PTT button operation and audio level changes during broadcast.
Alerts and Troubleshooting
Alert Codes and Responses
Lists alerts generated by PGM1/PGX1, their meanings, and recommended actions.
Product Specifications
General Specifications
Details dimensions, weight, power, temperature ranges, and included items for PGM1 and PGX1.
Electrical Specifications
Information on sampling frequency, digital format, and cable requirements for PGM1.
European Model Compliance
Environmental Standards
Information regarding compliance with EN55103-2:2009 environmental standards.
Dimensions and Diagrams
PGM1 Unit Dimensions
Detailed measurements and diagrams for the PGM1 unit and its gooseneck microphone.
PGX1 Dimensions
PGX1 Unit Measurements
Detailed measurements and diagrams for the PGX1 unit.
Guarantee Information
European and Swiss Customers
Notice regarding guarantee information and warranty service for EEA and Switzerland customers.
Need help?
Do you have a question about the PGX1 and is the answer not in the manual?
Questions and answers