Related Manuals for Masimo RAD-57M
Summarization of Contents
Overview of the Rad-57
About this Manual
Explains the purpose and structure of the operator's manual.
Safety Label Explanations
Explains the meaning of warning, caution, and note labels used in the manual.
Product Description and Benefits
Describes the features and benefits of the Rad-57 handheld pulse CO-Oximeter.
Indications for Use
Outlines the intended applications of the device and its accessories for patient monitoring.
Pulse CO-Oximetry Fundamentals
Introduces core concepts of pulse oximetry, SpO2, SpCO, and SpMet.
Principle of Operation
Saturation Measurement Principles
Covers functional vs. fractional saturation and measured vs. calculated values.
Masimo SET Signal Extraction Technology
Explains core technology for accurate SpO2 monitoring.
SpCO and SpMet Measurement Dynamics
Discusses motion artifacts and principles for SpCO and SpMet measurements.
Masimo Rainbow SET Parallel Engines
Illustrates the device's signal processing architecture.
Masimo SET DST® Algorithm
Explains a specific signal processing algorithm used by the device.
System Description
System Overview
General introduction to the Rad-57 system features and operation.
Rad-57c Front Panel Controls
Details the controls and indicators for the Rad-57c model.
Rad-57m Front Panel Controls
Details the controls and indicators for the Rad-57m model.
Rad-57cm Front Panel Controls
Details the controls and indicators for the Rad-57cm model.
Rad-57 Rear Panel Features
Describes the components and labels on the rear panel of the device.
Device Symbols Explained
Explains the meaning of various symbols found on the device and packaging.
Setup Procedures
Initial Setup Steps
Covers unpacking, inspection, and battery installation.
Power Requirements and Warnings
Details battery needs and crucial safety precautions.
Monitor Configuration
Guides initial device setup and line frequency configuration.
Device Operation
Basic Operation and Patient Connection
Covers initial device connection, power-on, and basic checks.
Default Settings Overview
Lists factory default configurations for device parameters.
Successful SpO2 Monitoring Practices
Provides tips for accurate SpO2 readings and sensor application.
Understanding Displayed Parameters
Explains SpO2, Pulse Rate, SpCO, SpMet, and PI readings.
Low Signal IQ and Perfusion Indicators
Explains signal quality indicators and perfusion status.
Sensitivity and Averaging Settings
How to adjust device sensitivity and signal averaging.
Battery Level Indicator and Alarm
Monitors battery status and explains low battery alerts.
Front Panel Control Operation
Explains button functions during monitoring and setup.
Setup Menu Navigation and Options
Guides through device configuration menus for alarms and settings.
Special Menu Configuration
Covers line frequency and other special settings.
Trend Data Management
Manages and transfers trend data to a PC.
Trend Data Formatting and Output
Explains trend data format and sample output.
Alarms and Messages
Alarm Indication and Notification
How the device signals alarm events through sound and visuals.
Configuring Alarm Limits
Setting high and low limits for patient parameters.
Alarm Silence and Indicator Status
How to manage alarm silence and understand indicator feedback.
Interpreting Device Messages
Explains message codes and provides solutions for system errors.
Troubleshooting Guide
Power and Battery Issues
Addresses power-on problems and significantly reduced battery life.
Control and Speaker Malfunctions
Diagnoses issues with buttons not working and continuous speaker tone.
Sensor Connection and Status Errors
Resolves 'Sensor Off' and 'No Sensor' messages.
Reading Accuracy and Quality Problems
Addresses flashing SpO2, low perfusion, signal quality, and unexpected readings.
Technical Specifications
Measurement Performance Ranges
Details measurement ranges for SpO2, SpCO, SpMet, and Pulse Rate.
Accuracy and Precision Data
Lists accuracy specifications for various conditions.
Factors Affecting Accuracy
Lists interfering substances and environmental factors impacting readings.
Electrical and Environmental Conditions
Covers operating conditions, power requirements, and environmental limits.
Alarm and Display Specifications
Describes alarm tones, display types, and update rates.
Regulatory Compliance
Outlines regulatory compliance standards met by the device.
Sensors and Patient Cables
Sensor Usage and Cautions
Covers general sensor use, safety, and compatibility.
Sensor Selection Criteria
Guides sensor choice based on patient weight, perfusion, and site.
Proper Sensor Application Techniques
Instructions for correct sensor placement and site care.
Masimo Rainbow Sensor Series
Details Rainbow sensor types, accuracy, and usage.
Masimo SpO2 Sensor Series
Details standard Masimo SpO2 sensors and their accuracy.
Sensor Accuracy Data Tables
Provides detailed accuracy data for various sensors.
Reusable Sensor Cleaning Procedures
Procedures for cleaning reusable sensors and patient cables.
Adhesive Sensor Reattachment
Instructions for reattaching single-use adhesive sensors.
Service and Maintenance
Oximeter Cleaning Procedures
Instructions for cleaning the device's display and outer surface.
Battery Replacement Guide
Instructions for replacing the device's batteries.
Performance Verification Procedures
Tests to confirm device functionality after maintenance or repair.
Service and Repair Process
How to obtain device service, repair, and return procedures.
Legal Agreements and Warranty
Covers sales terms, license, warranty, and exclusions.
Software License and Restrictions
Terms for software usage, copying, and distribution.
Accessories
List of Available Accessories
Lists part numbers for optional accessories like protective boots and cables.
Need help?
Do you have a question about the RAD-57M and is the answer not in the manual?
Questions and answers