Lubrication Information - Alamo Industrial Versa Series Operator's Manual

Lubrication Information

Before operating your Machete, take the time to inspect and repair any damage to the machine or tractor. Only
a minimum of time and effort is required to regularly maintain this machine to provide long life and trouble free
operation.
Do not let excess grease collect on or around parts, particularly when operating in sandy areas.
accompanying illustration shows lubrication points. The chart gives the frequency of lubrication in hours,
based on normal operating conditions.
lubrication.MOWER HEAD:
The A-Boom must be serviced daily to achieve the best operation and longest life. Two pumps of a good
quality grease from a hand grease gun in all grease fittings should be sufficient.
NOTE: Lubricate flail roller bearing until lubricant can be seen coming out between roller and bearing housing.
.
ITEM DESCRIPTION
1. Kingpin - Top
2. Kingpin - Bottom
3. Linkage Attachment
4. Hitch Post Attachment
5. Dipper Pin
6. Rotor Shaft Bearings
7. Rear Roller Bearings
8. Ditcher Spindle
VERSA 03/09
© 2009 Alamo Group Inc.
MAINTENANCE
Severe or unusual conditions may require more frequent
FREQUENCY
8 hours
8 hours
8 hours
8 hours
8 hours
8 hours
8 hours
8 hours
Maintenance Section 4-2
The