Alamo Industrial Versa Series Operator's Manual page 155

Timber Cat
• The Timber Cat Sickle Bar Limb Cutter is rated
for material up to 4" in diameter.
• The Timber Cat is operated attached to the
boom arm and is ideal for trimming populated
areas where a smooth cut is required.
• When operating the Timber Cat correctly the
limbs fall straight down for easy disposal and
clean-up.
• When operating the unit be sure there are no
bystanders or animals with in 100 yards of the
.
unit
OPS-B- 0044
Ditcher Head
• The Ditcher is designed to remove both debris
and dirt from ditches.
• When operating, the Ditcher can reach from up
to 12', and has a cutting width of 22".
• When operated in reverse rotation the spoil is
deposited between the tractor and ditcher.
When operated in forward the spoil is
deposited away from the tractor.
N O T E : C r e e p e r G e a r I s R e c o m m e n d e d !
Operating with out Creeper Gear on tractor (1/4
mph) will not allow ditcher time to cut.
OPS-B- 0045
Versa 03/09
© 2009 Alamo Group Inc.
OPERATION
Operation Section 3-43