Manual Setup; Speaker Setup; Speaker Configuration - Denon AVR-1909 Owner's Manual

ENGLISH

Manual Setup

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
SOURCE SELECT <DIMMER>
<SPEAKERS>
[Front]
SOURCE
SELECT
[Rear]

For details on how to select, set and cancel settings for each menu, see "Menu Operations" (vpage 17).
Make detail settings for various parameters.

Speaker Setup

BUTTON
Use this procedure to set the speakers manually or if you wish to
<BUTTON>
change the settings made with the auto setup procedure.
[BUTTON]
F Menu screen F
MENU
ui
1.Auto Setup
2.Manual Setup
3.Input Setup
4.Parameter
5.Information
a Speaker Confi guration
<MENU> op
Select speaker confi guration and size.
(bass reproduction capability)
Front Speaker
Select front speaker size.
[Selectable items] Large
Center Speaker
Select center speaker use and size.
SOURCE [Selectable items] Large
SELECT
Subwoofer
Select subwoofer use.
[A. MENU]
[Selectable items]
uiop
Surround Speaker
[TEST]
Select surround speakers use and size.
[Selectable items] Large
2.Manual Setup
1.Speaker Setup
2.HDMI Setup
3.Audio Setup
4.ZONE2 Setup
5.Option Setup
Small
Small None
Yes No
Small None
Surround Back Speaker
Select surround back speaker use and size.
[Selectable items] Large Small None
2spkrs 1spkr
Large
: Select this when using large speakers with ample low
frequency reproduction capabilities.
Small
: Select this when using small speakers without ample low
frequency reproduction capabilities.
None
: Select this when no speaker is connected.
Yes
: Select this when a subwoofer is connected.
No
: Select this when no subwoofer is connected.
2spkrs 1spkr
:
Select the number of surround back speakers.
Even when the surround back speaker setting is other than
"None", sound may not be emitted from the surround back
speaker, depending on the playback source. In this case, make
a menu "Parameter" – "Surround Parameter" – "SB CH Out"
setting other than "OFF" (vpage 40).
• Select "Large" or "Small" not according to the physical size of the
speaker but according to the low frequency reproduction capabilities
based on the frequency set at "Crossover Frequency" (vpage
26).
• When "Front Speaker" is set to "Small", "Subwoofer" can
automatically set to "Yes".
• If "Subwoofer" is set to "No", "Front Speaker" is automatically set
to "Large".
• If "Surround Speaker" is set to "None", "Surround Back Speaker"
are automatically set to "None".
• When "Front Speaker" is set to "Small", "Center Speaker" can not
be set to "Large".
• When using just one surround back speaker, connect it to the left
channel (SBL).
• When set to other than "7.1ch" with "Amp Assign", "Surround
Back Speaker" is not displayed.