Download Print this page

Advertisement

Quick Links

Cargo Max Assembly Instructions
1. ¾" Socket / Wrench (2)
2. 7/8" Wrench (Tongue Nut)
3. 13/16" ½ Deep Socket (Lug Nuts)
4. #2 Phillips Bit (License Plate Bracket)
650-72000-00
All material copyright ©2017 FLOE International, Inc. Unauthorized reproduction is strictly Prohibited. Specifications subject to change without notice. 8/7/17
TOOLS REQUIRED
5. ½ Drive Extension
6. Torque Wrench
7. Cordless Drill
1
9.5-73
11-73
13-73

Advertisement

loading
Need help?

Need help?

Do you have a question about the Cargo Max 13-73 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Cargo Max Trailer Assembly Guide
Required Tools for Cargo Max Assembly
Lists essential tools needed for the correct and safe assembly of the Cargo Max trailer.
Cargo Max Trailer Component Identification
Overview of Cargo Max Sub-assemblies
Identifies and describes the main pre-assembled parts included in the Cargo Max trailer kit.
Cargo Max Assembly: Step 1 - Attaching the Axle
Axle Isolation Strip Placement
Instructions for correctly positioning isolation strips on the axle mount before frame attachment.
Connecting Trailer Frame to Axle Mounts
Detailed steps for securing the trailer frame to the axle mounts using bolts, washers, and nuts.
Cargo Max Assembly: Step 2 - Attaching the Tires
Mounting and Securing Cargo Max Tires
Procedure for attaching wheels to hubs and tightening lug nuts to specified torque values.
Tire Inflation and Re-Torque Procedures
Guidance on inflating tires to maximum PSI and re-torquing after initial driving miles.
Cargo Max Assembly: Step 3 - Tongue Assembly
Installing Tilt Clamp and Limiter Strap
Instructions for sliding the tilt clamp and limiter strap onto the trailer tongue.
Connecting the Trailer Tongue to the Frame
Steps for securely attaching the trailer tongue assembly to the main frame using provided hardware.
Cargo Max Assembly: Step 4 - Tailgate Ramp Installation
Installing the Tailgate Ramp
Procedure for inserting the tailgate ramp into the bed's hinge clamps at the correct angle.
Cargo Max Assembly: Step 5 - License Plate Installation
Mounting the License Plate Bracket
Instructions for attaching the license plate bracket to the trailer frame's cross member.