Advertisement
Quick Links
Cargo Max Assembly Instructions
1. ¾" Socket / Wrench (2)
2. 7/8" Wrench (Tongue Nut)
3. 13/16" ½ Deep Socket (Lug Nuts)
4. #2 Phillips Bit (License Plate Bracket)
650-72000-00
All material copyright ©2017 FLOE International, Inc. Unauthorized reproduction is strictly Prohibited. Specifications subject to change without notice. 8/7/17
TOOLS REQUIRED
5. ½ Drive Extension
6. Torque Wrench
7. Cordless Drill
1
9.5-73
11-73
13-73
Advertisement
Related Manuals for Floe Cargo Max 9.5-73
Summary of Contents for Floe Cargo Max 9.5-73
- Page 1 6. Torque Wrench 3. 13/16” ½ Deep Socket (Lug Nuts) 7. Cordless Drill 4. #2 Phillips Bit (License Plate Bracket) 650-72000-00 All material copyright ©2017 FLOE International, Inc. Unauthorized reproduction is strictly Prohibited. Specifications subject to change without notice. 8/7/17...
-
Page 2: Sub-Assembly Components
2. Axle, Hubs, Tires ASSEMBLED 3. Tailgate Ramp ASSEMBLED 4. Tongue & Tongue Jack ASSEMBLED 5. Wheels & Tires ASSEMBLED 650-72000-00 All material copyright ©2017 FLOE International, Inc. Unauthorized reproduction is strictly Prohibited. Specifications subject to change without notice. 8/7/17... - Page 3 Make sure that the axle mount and axle beam are tight together with no gap before tightening. Torque to 40 FT/LBS. 650-72000-00 All material copyright ©2017 FLOE International, Inc. Unauthorized reproduction is strictly Prohibited. Specifications subject to change without notice. 8/7/17...
- Page 4 Inflate the tires to 80 PSI maximum. New wheels should be re-torque after the first 50 to 100 driving miles. 650-72000-00 All material copyright ©2017 FLOE International, Inc. Unauthorized reproduction is strictly Prohibited. Specifications subject to change without notice. 8/7/17...
- Page 5 Connect tongue harness to trailer harness and pull into tongue until there is 40” hanging out of grommet at the front of the tongue. Note: Pull trailer harness out of cross member through grommet as needed. 650-72000-00 All material copyright ©2017 FLOE International, Inc. Unauthorized reproduction is strictly Prohibited. Specifications subject to change without notice. 8/7/17...
- Page 6 NOTE: There are four hinge clamps on the bed. The Tailgate Ramp needs to be aligned to fit within each hinge. IF the ramp does not align, loosen hinge bolts install ramp and re-tighten hinge bolts. 650-72000-00 All material copyright ©2017 FLOE International, Inc. Unauthorized reproduction is strictly Prohibited. Specifications subject to change without notice. 8/7/17...
- Page 7 (see FIG. 5A & 5B). *May not be needed in states that do not require a license plate on a utility trailer. 650-72000-00 All material copyright ©2017 FLOE International, Inc. Unauthorized reproduction is strictly Prohibited. Specifications subject to change without notice. 8/7/17...
- Page 8 Cargo Max Assembly Assembly Parts Lists 650-72000-00 All material copyright ©2017 FLOE International, Inc. Unauthorized reproduction is strictly Prohibited. Specifications subject to change without notice. 8/7/17...
- Page 9 650-72000-00 All material copyright ©2017 FLOE International, Inc. Unauthorized reproduction is strictly Prohibited. Specifications subject to change without notice. 8/7/17...
Need help?
Do you have a question about the Cargo Max 9.5-73 and is the answer not in the manual?
Questions and answers