McAfee EPOLICY ORCHESTRATOR 4.5 Product Manual page 255

Setting Up Automatic Responses
Configuring Automatic Responses
Option
SNMP Version
Send Test Trap
Deleting an SNMP server
Use this task to delete an SNMP server from Notifications.
Task
For option definitions click ? in the interface.
1 Click Menu | Configuration | Registered Servers.
2 From the list of registered servers, select the desired SNMP server, then click Actions |
Delete.
3 When prompted, click Yes.
The SNMP server is removed from the Registered Servers list.
Importing .MIB files
Use this task when setting up rules to send notification messages to an SNMP server via an
SNMP trap. You must import three .mib files from
The files must be imported in the following order:
1 NAI-MIB.mib
2 TVD-MIB.mib
3 EPO-MIB.mib
These files allow your network management program to decode the data in the SNMP traps
into meaningful text. The EPO-MIB.mib file depends on the other two files to define the following
traps:
McAfee ePolicy Orchestrator 4.5 Product Guide
Definition
• SNMPv3 Security — Specifies the SNMPv3 security details. This field is enabled
only if the version of the server is v3.
• Security Name — Specifies the name of the security settings for the SNMP
server.
• Authentication Protocol — Specifies the protocol used by the SNMP server
for verification of the source.
• Authentication Passphrase — Specifies the password for protocol verification.
• Confirm Authentication Passphrase — Retype the password for protocol
verification.
• Privacy Protocol — Specifies the protocol used by the SNMP server to customize
the privacy defined by the user.
NOTE: If you select AES 192 or AES 245, you must replace the default policy
files with the "unlimited strength" version from Sun's Java SE Downloads site.
Java Cryptography Extension (JCE) Unlimited Strength Jurisdiction
Find the
Policy Files 6
download. To apply the unlimited strength policies to the ePO
server, replace the policy jar files in directory
those downloaded in the jce_pocliy-6.zip, and restart the ePO server.
• Privacy Passphrase — Specifies the password for privacy protocol settings.
• Confirm Privacy Passphrase — Retype the password for privacy protocol
settings.
Specifies the SNMP version your server uses.
Tests your configuration.
EPO_DIR/jre/lib/security
\Program Files\McAfee\ePolicy Orchestrator\MIB
with
.
255