For Network Users - Brother HL-1870n Driver Installation Manual

Driver Installation Guide
®
Macintosh

For Network Users

For HL-1850 users: If you are going to connect the printer to your network, purchase the optional Network
board (NC-4100h).
Before you continue, please ensure that the administrator has configured the network printer settings correctly
referring to the Network Quick Setup Guide.
Follow the instructions in this guide for your operating system.
Some illustrations are based on the HL-1870N.
Steps 1 to 4 Follow these steps in the Quick Setup Guide first.
®
Mac OS 8.6 to 9.2
For
Step 5 Connect the Printer to Your Macintosh
BR-Script PPD File
1 2
Click "Connect the interface cable & Select the Network interface
Install the driver/utility." cable.
Hub
4 5
Connect the network interface cable to the printer,
and then connect it to a free port on your hub.
7 8
Open the Chooser from the Apple menu. Click the LaserWriter8
select BRN_xxxxxx_P1_AT.
Click the Create... button.
Close the Chooser.
* 1 If the Apple LaserWriter8 Driver is not already installed on your system, you can download it from http://www.apple.com
* 2 xxxxxx are the last six digits of the Ethernet address. For more information, see Chapter 7 of the Network User's Guide.
©2002 Brother Industries, Ltd. ALL RIGHTS RESERVED
Apple Macintosh, iMac, LaserWriter, and AppleTalk are trademarks of Apple Computer, Inc. Adobe PostScript and PostScript3 are trademarks of Adobe Systems Incorporated.
All other brand and product names are trademarks or registereted trademarks of their respective holders.
Users Only
®
& Install the
O I
OFF ON
3
Turn off the printer power switch.
O I
OFF ON
6
Turn on the printer power switch. Follow the instructions on
the screen.
The Setup is now complete.
* 1
icon, and then
* 2
®
Mac OS X 10.1
For
Step 5 Connect the Printer to Your Macintosh
Hub
O I
OFF ON
1 2
Turn off the printer power switch. Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
5 6
Open your language folder. Double-click the PPD
Installer icon.
Follow the instructions on
the screen.
0 A
Click the Add Printer... button. Select AppleTalk.
3 xxxxxx are the last six digits of the Ethernet address. For more information, see Chapter 7 of the Network User's Guide.
*
Data LED : Orange
Control Panel
On
Blinking
Off
Buttons
Go
Job Cancel
Reprint
Data Menu
Set
Back
Back
Reprint
Language Setting (Default setting is English)
Set
Job cancel
1. Select the SETUP mode by pressing the
Go
2. Check that the LANGUAGE message appears, and then press the Set button.
3. Choose your language by pressing the
display.
(You can return to the READY status by pressing the Go button.)
Note Please enhance the RAMDISK size when you want to use the Reprint functions without the optional HDD or CompactFlash.
See "RAM expansion" in Chapter 4 of the User's Guide on the supplied CD-ROM.
For more information, see "CONTROL
PANEL" in Chapter 3 of the User's Guide on
the supplied CD-ROM.
Users Only
®
& Install the BR-Script PPD File
O I
OFF ON
3
Turn on the printer power switch.
7 8
Open the Macintosh HD Open the Applications folder.
icon. Open the Utilities folder.
* 3
B C
Select BRN_xxxxxx_P1_AT ,
and then click the Add button.
Data remains in the printer buffer.
Receiving or processing data.
No remaining data.
Exit from the control panel menu, Reprint settings or clear error messages.
Pause / Continue printing.
Stop and cancel the printer operation in progress.
Select the Reprint menu.
Move forward through menus.
Move backward through menus.
Select the control panel menu.
Set the selected menus and settings.
Go back one level in the menu structure.
+
button, and then press the Set button.
+ -
or button, and then press the Set button. An asterisk mark (
4
Insert the CD-ROM into the CD-ROM drive.
Open the Mac OS X folder.
9
Open the Print Center icon.
Select Quit Print Center from the Print
Center menu.
The setup is now complete.
) appears at the end of the
*