Papr Size Mismatch; This Paper Cannot Be Used - Canon 2162B002 User Manual

Papr Size Mismatch

The paper size as specied on the printer does not
match the size specied in the printer driver.

This paper cannot be used.

Check supported paper sizes.
The loaded paper is too large for the printer.
The loaded paper is too small for the printer.
Paper has been loaded that is too small to print
the test pattern for printhead adjustment or nozzle
checking.
Cause
Cause
Corrective Action
Adjust the paper size setting in the printer driver to
match the size loaded in the printer as follows.
1.
Hold down the Stop button for a second or more
to cancel printing.
2.
Change the paper size setting in the printer driver
to the size loaded in the printer and try printing
again.
Replace the loaded paper with paper of a size that
matches the size setting in the printer driver as
follows.
1.
Hold down the Stop button for a second or more
to cancel printing.
2.
Replace the loaded paper to match the paper size
setting in the printer driver and try printing again.
Press the Online button to resume printing.
However, this may cause a paper jam or printing
problem.
Corrective Action
Load paper of the correct size.
(→P.173)
Load paper of the correct size.
(→P.173)
Load unused paper A4/Letter-sized or larger. More
than one sheet may be required depending on the
adjustment.
Messages regarding paper
Error Message 763