7.
Make sure the width of the loaded roll is displayed in the
in. (254.0mm).
Note
•
If the width of the loaded roll is not displayed in
pane and update the printer information.
8.
Access the Page Setup pane.
9.
B
In
Page Size, make sure "My Horizontal Banner" is displayed, as registered in Media Design.
10.
C
Select the
Enlarged/Reduced Printing check box.
11.
E
Click
Fit Roll Paper Width.
12.
Conrm the print settings, and then click
Note
•
For tips on conrming print settings, see "Conrming Print Settings (Mac OS 9)". (→P.581)
Printing banners or at other non-standard sizes
B
Roll Paper Width list-in this case, 10
B
Roll Paper Width, click
N
Print to start printing.
L
Printer on the Main
Enhanced Printing Options 407