The Edges Of The Paper Are Dirty - Canon 2162B002 User Manual

The edges of the paper are dirty

The Platen has become dirty after borderless printing
or printing on small paper.
The paper type as specied on the printer does not
match the type specied in the printer driver.
The paper is wrinkled or warped.
A cut line is printed because the function to reduce
cutting dust has been activated.
You are printing on heavyweight paper or paper that
curls or wrinkles easily after absorbing ink.
The Printhead is set too low.
The Ejection Guide is soiled.
Cause
Problems with the printing quality
Corrective Action
Open the Top Cover and clean the Platen .
(→P.714)
Make sure the same paper type is specied on the
printer as in the printer driver.
(→P.186)
(→P.213)
Make sure the same paper type is specied in the
printer driver as on the printer.
1.
Hold down the Stop button for a second or more
to cancel printing.
2.
Change the paper type in the printer driver and
try printing again.
Straighten out the wrinkles or curls and reload the
paper. Do not use paper that has been printed on
previously.
(→P.180)
(→P.210)
If this function is not needed, deactivate
CutDustReduct. through the printer menu.
(→P.48)
When printing on Heavyweight Coated Paper or
other paper-based media, choose a VacuumStrngth
setting of Strong or Strongest . If the paper is still
scratched, try raising the Printhead higher in Head
Height , one level at a time. (→P.657) (→P.650)
When printing on CAD Tracing Paper or lm-based
media, choose a VacuumStrngth setting of Standard
, Strong , or Strongest . If the paper is still scratched,
try raising the Printhead higher in Head Height , one
level at a time. (→P.657) (→P.650)
In Head Height , choose Automatic . (→P.650)
Clean the Ejection Guide . (→P.712)
Troubleshooting 737