Using The Printer Front Panel To Allocate An Ip Address (Printers With Lcd Panels Only) - Brother HL-1470N Network User's Manual
Multi protocol print server
Hide thumbs
Also See for HL-1470N:
- Quick network setup manual (2 pages) ,
- Technical reference manual (517 pages) ,
- Service manual (250 pages)
Table of Contents
Advertisement
Other ways to CHANGE the IP address once it is already set:
1. Printer front panel
2. TELNET
3. HTTP (Web browser)
4. Other SNMP based management utility
These configuration methods are described in the following paragraphs.
The IP address you assign to the print server must be on the same logical network as
your host computers, if it is not, you must properly configure the subnet mask and
the router (gateway).
Using the printer front panel to allocate
an IP address (printers with LCD panels
only)
Refer to the Quick setup guide for details on how to configure IP address information
using the printer control panel. By using the front panel of the printer, you can
program the IP address details at the same time that other printer parameters are
configured.
CHAPTER 10 TCP/IP CONFIGURATION
10-2
Advertisement
Table of Contents
Troubleshooting
