General Information - Brother HL-1470N Network User's Manual

CHAPTER 6 NOVELL NETWARE PRINTING

General Information

In order to use a Brother print server on a NetWare network, one or more file servers
must be configured with a print queue that the print server can service. Users send
their print requests to the file server's print queue, and the jobs are then spooled
(either directly, or in the case of remote printer mode, via an intermediate print
server) to the appropriate Brother print server.
The system administrator can create Bindery (NetWare 3), NDS (NetWare 3 and
NetWare 4) based queues in a single environment without having to switch between
applications by using the BRAdmin application.
NetWare 5 users wishing to configure an NDPS printer must use the NWADMIN
application supplied with NetWare 5. Please note that it is possible to create IPX
BINDERY or NDS based queues on a NetWare 5 system using the BRAdmin
application.
You must install the Novell NetWare Client 32 if you wish to create queue
information on your NetWare servers using the BRAdmin application.
If you can't use the BRAdmin application in your environment, you can create the
queue using the traditional NetWare PCONSOLE utility or NWADMIN utilities, but
you will then also need to use the Brother BRCONFIG utility, TELNET or a WWW
browser to configure the print server as described later in this chapter.
Brother print servers can service up to 16 file servers and 32 queues.
6-2