Brother HL-1470N Network User's Manual page 58

9. You will then be asked to enter the port settings for the remote print server:
Enter any unique legal Internet E-mail address for the remote print server
(for example emailprinter@xyz.com). Note that Internet E-mail addresses
cannot have spaces in them.
Enter your E-mail address and the IP address of your SMTP E-mail server
(consult your network administrator if you do not know this address). Also
specify if you are going to use the Partial E-mail Print option and
Notification type.
10. Press OK to continue. You will then be asked to re-start your computer.
11. One your computer has re-started you must create a printer on your
Windows 95/98/Me/NT4.0 system using the standard Windows
95/98/Me/NT4.0 printer setup procedure. To do this, go the Start button,
select Settings and then Printers.
12. Select Add Printer to begin the printer installation.
13. Click Next when you get the Add Printer Wizard window.
(For Windows 95/98/Me user)
14. Select Local Printer, when you are asked how the printers are connected to
your computer and push Next.
(For Windows NT4.0/2000 user)
14. Select Local Printer, and then delete the check mark in Plug and Play check
box.
CHAPTER 5 BIP INTERNET PRINTING INSTALLATION
5-8