Additional Information - Denon AVR-985 Operating Instructions Manual

17 ADDITIONAL INFORMATION

Optimum surround sound for different sources
There are currently various types of multi-channel signals (signals or formats with more than two channels).
Types of multi-channel signals
2
Dolby Digital, Dolby Pro Logic, DTS, high definition 3-1 signals (Japan MUSE Hi-Vision audio), DVD-Audio, SACD (Super Audio CD), MPEG multi-
channel audio, etc.
"Source" here does not refer to the type of signal (format) but the recorded content. Sources can be divided into two major categories.
Types of sources
2
• Movie audio Signals created to be played in movie theaters. In general sound is recorded to be played in movie theaters equipped
with multiple surround speakers, regardless of the format (Dolby Digital, DTS, etc.).
Movie theater sound field
FL SW C FR
SL
SB
Multiple surround speakers
(For 6.1-channel system)
• Other types of audio These signals are designed to recreate a 360° sound field using three to five speakers.
FL SW C FR
SL
These two types of sources thus have different properties, and different speaker settings, particularly for the surround speakers, are required
in order to achieve the ideal sound.
The AVR-2805/985 is equipped the function of surround speakers selection that makes it possible to change the settings according to the
combination of surround speakers being used and the surrounding environment in order to achieve the ideal surround sound for all sources.
This means that you can connect a pair of bipolar or dipolar surround speakers (mounted on either side of the prime listening position), as well
as a separate pair of direct radiating (monopolar) speakers placed at the rear corners of the listening room.
Listening room sound field
SR
FL
SL
In this case the speakers should surround the listener from all sides to create a uniform sound
field from 360°. Ideally the surround speakers should function as "point" sound sources in the
same way as the front speakers.
SR
SW C FR
In this case it is important to achieve the same sense of
expansion as in a movie theater with the surround channels.
SR
To do so, in some cases the number of surround speakers is
increased (to four or eight) or speakers with bipolar or dipolar
properties are used.
SL: Surround L channel
SB
SR: Surround R channel
SB: Surround back channel
87