Setting The Power Amplifier Assignment - Denon AVR-985 Operating Instructions Manual

5-1 Setting the Power Amplifier Assignment

Make this setting to switch the power amplifier for the surround back channel to ZONE2.
If ZONE2 is selected, the signal that selected at ZONE2 is output at "SURR. BACK ZONE2 PREOUT" terminals.
1
(Remote control unit)
2
(Remote control unit)
3
(Remote control unit)
4
(Remote control unit)
5-2 Setting the Zone2 Vol. Level
Set the Zone2 pre-out output level adjustment.
1
(Remote control unit)
2
(Remote control unit)
Select "Power Amp Assign" at the Option Setup Menu.
Press the ENTER button.
Display the Power Amp Assign screen.
Select "Surround Back" to use as the surround back channel,
"Zone2" to use as Zone2 out.
Enter the setting.
The Option Setup Menu reappear.
At the Option Setup Menu select "Zone2 Vol. Level".
Display the Zone2 Vol. Level screen.
When "Surround Back" is selected When "Zone2" is selected
43