Remote Id Setup; Surround Modes; Standard Playback; Surround Playback Of 2-Channel Sources - Denon AVR-588 Owner's Manual

ENGLISH
h Remote ID Setup
Set remote control ID.
[Display]
1 . S p 2 . I n 3 . O p
O p t i o n S e t u p
6 R e m o t e I D 1
[Selectable items] 1 2
NOTE
When using the AVR-588 with only the included remote control unit
(RC-1075), there is no need to make settings.
When using a separately sold remote control unit (RC-7000CI, etc.),
this function can be used. Match the ID setting of the remote control
unit and the receiver.
Operations (vpage 19)


Surround Modes

E

Standard Playback

This is the standard mode for enjoying surround sound according
E
to the program source.
3 4

Surround Playback of 2-channel Sources

To select these surround modes using the SELECT/ENTER knob on
the main unit or press the STD button on the remote control unit. The
mode switches each time the button is pressed.
n When using a surround back speaker
[Selectable items] DOLBY PLgx DTS NEO:6
n When not using a surround back speaker
[Selectable items]
DOLBY PLgx
DOLBY PLg
or
Cinema
Music
Game
Pro Logic
neural
DOLBY PLg DTS NEO:6 neural
: The signals are decoded in DOLBY PLgx or
DOLBY PLg for playback.
: This mode is suited for movie sources.
: This mode is suited for music sources.
: This mode is suited for games.
: This is the Pro Logic playback mode. This can
be selected when playing with a DOLBY PLg
decoder. When this mode is selected, "DOLBY
PL " is displayed.
DTS NEO:6
: The signals are decoded in DTS NEO:6 for
playback.
Cinema
: This mode is suited for movie sources.
Music
: This mode is suited for music sources.
: It is possible to play analog input signals and
neural
PCM (2-channel, 48 kHz or less) in the surround
mode.
This is the optimum mode for playing sources
recorded in XM HD Surround (vpage 34).
Select the "Cinema" , "Music" , "Game" and "Pro Logic" modes at
"Surround Parameter" – "MODE" (vpage 27).