Multi-Zone Operations; Turning The Power On And Off; Selecting The Input Source; Adjusting The Volume - Denon AVR-588 Owner's Manual

SOURCE SELECT
<ZONE2 ON/OFF>
<ZONE2 / REC SELECT>
[Front]
SOURCE
SELECT
VOLUME
[MUTING]
[MODE
SELECTOR 2]
[MODE
SELECTOR 1]
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit

Multi-zone Operations

VOLUME

Turning the Power On and Off

GOperation on the main unitH
<ZONE2 ON/OFF>
Press for the zone to be operated.
GOperation on the remote control unitH
[MODE SELECTOR 1]
Set
"ZONE2" .
Press [ZONE2 ON] or [ZONE2 OFF]

Selecting the Input Source

[Rear]
[ZONE2 OFF]
GOperation on the main unitH
[ZONE2 ON] Press <ZONE2 / REC SELECT>
GOperation on the remote control unitH
SOURCE
[MODE SELECTOR 1]
Set
SELECT
"ZONE2" .
[SOURCE SELECT]
Press .

Adjusting the Volume

Set [MODE SELECTOR 1] to "AUDIO" and [MODE SELECTOR 2] to
"ZONE2" .
Press [VOLUME].
– – – –70dB ~ –40dB ~ +18dB
[Variable range]
The ZONE2 volume can be adjusted only when "ZONE2" is selected
at "System Setup" – "Option Setup" – "Amp Assign" (vpage 24).
[MODE SELECTOR 2]
to "AUDIO" and to
.
, then turn <SOURCE SELECT> .
[MODE SELECTOR 2]
to "AUDIO" and to

Turning off the Sound Temporarily

[MODE SELECTOR 1]
Set to "AUDIO" and
"ZONE2" .
[MUTING]
Press .
b To cancel, either adjust the volume or press
The setting is canceled when the zone's power is turned off.
The source selected for ZONE2 is also output from the recording
output connectors.
NOTE
Digital audio signals input from the COAXIAL or OPTICAL connectors
cannot be played in multi-zone.
ENGLISH
[MODE SELECTOR 2]
to
[MUTING]
again.