Table of Contents
Advertisement
OPERATOR'S MANUAL
BEDIENUNGSANLEITUNG
MANUALE D'ISTRUZIONI
WARNING
READ INSTRUCTIONS CAREFULLY AND FOLLOW RULES FOR
SAFE OPERATION.
FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY.
ACHTUNG
LESEN SIE DIE BEDIENUNGSANLEITUNG SORGFÄLTIG DURCH
UND BEFOLGEN SIE DIE SICHERHEITSBESTIMMUNGEN, WEIL
SONST DAS RISIKO SCHWERER VERLETZUNGEN BESTEHT.
AVVERTENZA
LEGGERE E SEGUIRE ATTENTAMENTE LE ISTRUZIONI PER
USARE IL DECESPUGLIATORE IN MANIERA SICURA.
LA MANCATA OSSERVANZA DI QUESTA AVVERTENZA
POTREBBE CAUSARE GRAVI LESIONI.
GB
D
I
CLS-5800
CLS-5810
DANGER
GEFAHR
PERICOLO
ENGLISH
DEUTSCH
ITALIANO
GB
D
I
Advertisement
Table of Contents
Related Manuals for Echo CLS-5810
Summarization of Contents
Operator's Manual Introduction
Safety Warnings
Important safety alerts regarding potential hazards and injuries.
Introduction
About the ECHO Product
Overview of ECHO clearing saws/brushcutters and manual purpose.
Decals and Symbols
Understanding Safety Decals
Explanation of various safety symbols and their meanings.
Rules for Safe Operation
Operator Training Requirements
Ensuring proper training and protective equipment for safe operation.
General Safety Rules for Operation
Key rules for safe use, including warnings about thrown objects.
Personal Protective Equipment (PPE)
Eye Protection Guidelines
Mandatory eye protection against thrown objects, dust, seeds, and pollen.
Hearing Protection Guidelines
Protecting hearing from prolonged exposure to loud noise.
Protective Clothing
Protective Clothing Requirements
Choosing appropriate clothing for safe operation, avoiding loose items.
Safety and Preparation
General Safety Advice
Additional safety precautions for operation and user awareness.
Unit Balancing and Harness Setup
Instructions for balancing the unit and adjusting the shoulder harness.
Fuel Handling and Storage
Fuel Properties and Safety
Information on fuel type, mixture, flammability, and safe handling.
Operator Physical Condition
Requirements for operator's mental and physical health before use.
Pre-Operation Inspection
Area and Equipment Inspection
Inspecting the work area and the unit before starting operation.
General Operation Procedures
General Operation Rules
Guidelines for running the engine safely, avoiding fumes and loads.
Safe Operation Guidelines
Cutting Attachment Height and Danger Zone
Awareness of cutting attachment height and danger zone radius (15m).
Operational Safety Practices
Sudden Vibration Response
Immediate actions to take if the unit vibrates suddenly.
Basic Safety Practices
Stopping the engine, keeping hands away from hot parts.
Post-Operation Procedures
Attachment Stopping and Safety
Ensuring attachment stops before setting down, and maintenance notes.
Handling the Unit
Two-Handed Operation
Instructions for proper grip and operation using both hands.
Emergency Release Mechanism
How to use the quick-release pin on the harness in an emergency.
Health Considerations
Vibration and Cold Exposure Effects
Information on Raynaud's Phenomenon and recommended precautions.
Health Considerations
Repetitive Stress Injuries (RSI)
Risks and prevention of RSI from repetitive hand activities.
Safe Operation: Nylon Line Cutting Head
Trimming and Edging Techniques
Basic cutting actions for trimming, mowing, scalping, and edging with nylon line.
Safe Operation: Nylon Line Cutting Head
Scything and Edging Techniques
Cutting large grassy areas (scything) and trimming edges (scalping/edging).
Nylon Line Operation Safety
Nylon Line Rotation and Gravel Caution
Correct line rotation and caution when cutting over bare spots or gravel.
Nylon Line Operation Safety
Wire Fencing Hazards and Jam Response
Precautions for nylon line near wire fencing and handling line jams.
Wire and Line Safety
Broken Wire Hazards
Risks associated with nylon line contact with broken fencing wire.
Cutting Attachment Safety Warnings
General safety warnings for the cutting attachment, including line length.
Safe Operation: Metal Blade
Metal Blade Selection and Inspection
Using the correct metal blade and inspecting it for cracks before use.
Safe Operation: Metal Blade
Scything Weeds with Metal Blade
Using the metal blade for scything weeds and handling attachment jams.
Reaction Forces
Understanding Push, Pull, and Kickback
Explanation of reaction forces and their effect on balance and operation.
Component Identification
Parts List and Description
Detailed list and description of all unit components (1-22).
Assembling the Unit
Drive Shaft and U-Handle Installation
Instructions for assembling the drive shaft and installing the U-handle.
Assembling the Unit
Right Handle Installation
Steps for assembling and positioning the right-side handle.
Shield Installation
Shield Installation (CLS-5800)
Procedure for mounting the shield on the CLS-5800 model.
Shield Installation (CLS-5810 Metal Blade/Saw)
Procedure for mounting the shield on CLS-5810 with metal blade/circular saw.
Shield and Blade Installation
Shield Installation (CLS-5810 Nylon Line)
Procedure for mounting the shield on CLS-5810 with nylon line attachment.
Blade Installation
Instructions for installing metal blades, including inspection and tightening.
Cutting Attachment Installation
Nylon Line Cutting Attachment Installation
Steps for fitting the nylon line head, including alignment and tightening.
Fuel Handling and Storage
Fuel Mixture and Type
Recommended fuel mixture ratio and fuel type specifications.
Fuel Handling Precautions
Safe practices for handling, storing, and refueling with gasoline.
Fuel Handling
Refueling Safety
Procedures for safe refueling, including cap tightening and leak checks.
Engine Operation
Starting Cold Engine
Step-by-step instructions for starting a cold engine.
Engine Operation
Cold Engine Starting Procedures
Detailed steps for cold engine start, including choke and throttle use.
Engine Operation
Starting Warm Engine
Instructions for starting a warm engine, including choke and throttle settings.
Stopping Engine
Engine Shutdown Procedure
How to properly stop the engine and ensure safety.
Maintenance and Care
Air Filter Cleaning
Procedure for cleaning or replacing the air filter.
Fuel Filter Replacement
Instructions for removing and installing the fuel filter.
Carburettor Adjustment
Carburettor Adjustment Procedure
General steps for adjusting the carburettor, including idle speed.
Carburettor Adjustment
Idle and Speed Adjustment
Fine-tuning idle speed and high/low speed mixture for optimal performance.
Cooling System Maintenance
Maintaining Airflow
Ensuring proper engine cooling by keeping air intakes clear.
Routine Maintenance
Silencer Cleaning
Cleaning the silencer and tightening bolts.
Spark Plug Check and Replacement
Inspecting and adjusting the spark plug gap, and replacing if necessary.
Drive Shaft Lubrication
Lubricating the drive shaft periodically for smooth operation.
System Checks
Angle Transmission Check
Checking and lubricating the angle transmission.
Fuel System Check
Inspecting the fuel system for leaks before each use.
Trouble Shooting
Troubleshooting: Engine Cranks, No Start
Diagnosing and resolving issues when the engine cranks but fails to start.
Troubleshooting: Engine Does Not Crank
Diagnosing and resolving issues when the engine fails to crank.
Trouble Shooting
Troubleshooting: Engine Starts Hard
Identifying causes and remedies for difficult engine starting.
Troubleshooting: Engine Runs Poorly
Addressing issues when the engine runs poorly or has poor acceleration.
Trouble Shooting
Troubleshooting: Engine Dies or Accelerates Poorly
Resolving problems where the engine stalls or accelerates poorly.
Storage
Long Term Storage Procedures
Instructions for preparing the unit for storage longer than 30 days.
Storage
Storage Precautions
Important precautions for storing the unit, including fuel draining and oiling.
Specifications
General Unit Specifications
Technical data including mass, dimensions, engine details, and fuel capacity.
Declarations and Guarantees
CE Declaration of Conformity
Manufacturer's declaration confirming compliance with relevant EU directives.
Warranty and Guarantee Terms
General Warranty Conditions
Details on warranty period, usage, and claim procedures.
Warranty Exclusions and Maintenance Requirements
Conditions excluding warranty coverage and required maintenance for validity.
Need help?
Do you have a question about the CLS-5810 and is the answer not in the manual?
Questions and answers