Denon AVR-3300 Operating Instructions Manual page 51

Tone control setting
• Use the tone control setting to adjust the bass and treble as desired.
• To operate the tone control from the remote control unit.
1
(Remote control unit)
2
(Remote control unit)
3
(Remote control unit)
4
(Remote control unit)
5
(Remote control unit)
6
(Remote control unit)
• To operate the tone control from the main unit.
1
TONE
CONTROL
(Main ulnit)
2
(Main ulnit)
Display the surround parameter
screen on the monitor.
The screen for the selected
*
surround mode appears.
"TONE" cannot be selected
in the Direct mode.
Select "TONE".
Switch to the Tone Control
screen.
To select Bass or Treble.
Enter the setting.
The surround menu screen re-appears.
To end the setting mode, press the surround parameter button again.
The tone switches as follows each time the TONE CONTROL button is pressed.
BASS TREBLE
0 1
With the name of the volume to be adjusted selected, turn the SELECT knob to adjust the level.
• To increase the bass or treble:
Turn the control clockwise. (The bass or treble sound can be increased to up to +12 dB in steps of 2 dB.)
• To decrease the bass or treble:
Turn the control clockwise. (The bass or treble sound can be decreased up to –12 dB in steps of 2 dB.)
To set the level.
(Remote control unit)
ENGLISH
RC-860
START LEARNED/TX
SYSTEM CALL POWER
SET CALL OFF ON / SOURCE
DVD VDP TUNER SHIFT
1 2 3
TV/DBS PHONO
4 5 6
VCR-1 CD MD / TAPE CHANNEL
7 8 9
VCR-2/V.AUX
TV/VCR
+10 0
A / B
VOLUME DISC SKIP+
DOLBY / DTS
SPEAKER SURROUND DIRECT
DSP SIMULATION 5CH STEREO STEREO
MASTER VOL.
INPUT MODE ANALOG EXT.IN
DECK MD
AUDIO CD MULTI MUTING
AVR/AVC VIDEO DVD TV
VDP VCR
SYSTEM SURROUND
TUNING SETUP PARAMETER 1,6
TITLE MENU/GUIDE
BAND
2,4
CH SELECT
ENTER
MODE
3,5
SELECT
MEMORY STATUS ON SCREEN
DISPLAY RETURN
USE/LEARN T.TONE MULTI OUTPUT DVD
SET UP
51