Getting Started; Description Of Keypad Functions - EUTECH INSTRUMENTS COND 6 PLUS Instruction Manual

Instruction Manual

2. GETTING STARTED

2.1

Description of Keypad Functions

Your meter has 6 keys on its splash-proof keypad. Some
buttons have multiple functions depending on the mode of
operation.
ON/OFF Powers meter on and off. Meter starts up in the
measurement mode that you last switched off
from.
Enters into calibration mode. Pressing while in
CAL
calibration mode will abort calibration without
confirming value.
Selects desired measurement mode. When pressed simultaneously with
MODE
ON/OFF, it will take you into the SETUP mode. See ADVANCED SETUP
section for more information.
Freezes measured reading. Press again to resume live reading.
HOLD
Confirms calibration value in calibration mode and confirm selections in
ENTER
SETUP mode.
Increment values during calibration mode or scroll through SETUP.
Activates manual ranging function during conductivity / TDS measurement.
Decrement values during calibration mode.
-2-
COND 6+, TDS 6+, SALT 6+