Table of Contents
Advertisement
COMPETITION AMPLIFIERS
2|01
K
2|02
K
2|03
K
2|04
K
MICRO
pROCESSOR
onboard
MANUALE D'USO
Amplificatore di potenza audio a due
canali per auto
USER'S GUIDE
Two-channel car audio
power amplifier
MANUEL D'UTILISATION
Amplificateur de puissance audio à
deux canaux pour automobile
BEDIENUNGSANLEITUNG
Zweikanal-Audio-Leistungsverstärker
für das Auto
MANUAL DE USO
Amplificador de potencia audio
de dos canales para automóvil.
Advertisement
Table of Contents
Related Manuals for Steg K 2.03
Summarization of Contents
INTRODUCTION
The User's Guide
Explains correct installation and operation for maximum performance.
Safety
Crucial information for ensuring safety during installation and use.
PRODUCT DESCRIPTION
Packaging and contents
Lists all items included in the amplifier's package for verification.
General description
Overview of Kcompetition stereo audio power amplifiers for car use.
Input
Details the RCA stereo input for connecting audio sources like tuners or CD players.
Power supply
Explains connections for battery, ground, and remote terminals for power.
DPM (Digital Protection Manager)
Monitors amplifier status in real-time for safety.
CONTROL PANEL
Operating status indicators
Explains the Green "ON" and Red "PT" indicator LEDs for status.
Power Supply Connections
Details positive and negative power supply terminal connections.
Remote and STEGLINK Connections
Connects remote control and STEGLINK for function control.
ADJUSTMENTS AND USE
First usage
Initial setup steps before connecting terminals to the battery.
Sensitivity adjustment
How to match amplifier sensitivity to source output voltage for optimal performance.
Crossover adjustment
Filter Type Selection
Selects filter types: High Pass, Low Pass, or Bandpass.
Frequency Setting
Sets the filter intervention frequency using AQXM2 modules or SW4FQ switch.
FILTER "Q" SETTING
Setting the "Q" factor to 0.7
Sets the HP X-OVER filter "Q" factor to 0.7 for a linear response.
Setting the "Q" factor to 1.2
Sets the HP X-OVER filter "Q" factor to 1.2 for +1.5 dB emphasis.
FILTER SLOPE SETTING
Setting slope to 12 dB
Sets the selected filter cut-off slope to 12 dB using the selector.
Setting slope to 24 dB
Sets the selected filter cut-off slope to 24 dB using the selector.
CONFIGURATIONS
TRIMODE Configuration Example
Example setup for TRIMODE connection with specific settings.
BRIDGED MONO Configuration Example
Example setup for BRIDGED MONO connection with specific settings.
STEREO Configuration Example
Example setup for STEREO connection with specific settings.
MAINTENANCE
Fuse replacement
Procedure for replacing a blown fuse with one of the same type and capacity.
After-sales service
Information on technical assistance and repairs from the retailer.
FAULTS AND TROUBLESHOOTING
No sound, LEDs off or blinking
Troubleshooting steps for no sound and incorrect LED status.
No sound, ON LED off, PT LED on
Troubleshooting steps for no sound when "ON" is off and "PT" is on.
No sound, ON/PT LEDs on
Troubleshooting steps for no sound when both "ON" and "PT" LEDs are on.
Engine humming noise
Troubleshooting engine humming noise alongside sound reproduction.
Distorted sound reproduction
Troubleshooting steps for distorted sound output from the amplifier.
Need help?
Do you have a question about the K 2.03 and is the answer not in the manual?
Questions and answers