Antenna Terminals - Denon AV SURROUND RECEIVER AVR-5308CI Owner's Manual

Antenna terminals

An F-type FM antenna cable plug can be connected directly.
AM/FM
(White)
AM outdoor antenna
Note to CATV system installer:
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC
which provides guidelines for proper grounding
and, in particular, specifies that the cable ground
shall be connected to the grounding system of
the building, as close to the point of cable entry
as practical.

Direction of broadcasting station
FM antenna
AM loop antenna
(small, supplied)
(Black)
75 Ω/ohms
Coaxial cable
FM indoor
antenna
(supplied)
Ground
AM loop antenna assembly
Remove the vinyl tie and take
out the connection line.
a. With the antenna on top of
any stable surface.
Mount
HD Radio™ broadcast
HD Radio broadcast is a service that is only available within the United States.
Direction of broadcasting station
FM antenna
75 Ω/ohms
Coaxial cable
FM indoor antenna
(dipole, for HD Radio
broadcasting, supplied)
Connect to the AM
antenna terminals.
Bend in the reverse direction.
b. With the antenna attached
to a wall.
Installation hole Mount on wall, etc.
AM loop antenna
(large, for HD Radio broadcasting, supplied)
• To prevent interference, install at least 3.3 feet/
1 m away from the antenna connected to the
AVR-5308CI's other AM tuner terminal.
(White)
(Black)
AM outdoor antenna
Ground
Connection of AM antennas
1. Push the 2. Insert the 3. Return the
lever. conductor.
NOTE
• Do not connect two FM
simultaneously.
• Even if an external AM antenna is used, do not
disconnect the AM loop antenna.
• Make sure the AM loop antenna lead terminals do
not touch metal parts of the panel.
lever.
antennas