3Com 000839-08 Manual page 54

NOTE:
If you do not see your
modem listed in the preceding
screen, the Plug and Play installation
was unsuccessful. Please refer to the
"Manual Modem Installation"
section on page 49.
7. Next, click the Diagnostics tab at the top
of the "Modems Properties" screen. Write
down the COM setting for your modem.
(NOTE: Your screen may show a different
setting than that shown in the following
screen.) You will need to know this setting
when you install RapidComm.
E M I
XTERNAL ODEM NSTALLATION WITH
W 95
INDOWS
Turn to "Software Installation and Testing"
(page 57) for detailed information about
installing RapidComm, registering the
modem, and trying out your modem by
faxing U.S. Robotics.
49