Toyota TUNDRA-2005 Owner's Manual page 638

Setup Menu 1 screen
Setup Menu 2 screen
SETUP MENU
There are initial setting switches on the
"Setup Menu 1" screen and "Setup Menu
2" screen.
To change the screen, touch the "Top Page"
or "Second Page" switch on the screen.
After you change the initial setting, touch the
"Enter" switch. The initial setting switch will
be turned off and return to the picture pre-
viously.
When the "Initial Setting" switch on "Setup
Menu 2" is touched, all menus are initialized.
The initial setting can be changed.
_
Audio language
You can change the audio language.
1. Touch "Audio Lang.".
2. Touch the language you want to hear
on the "Select Audio Lang." screen.
If you cannot find the language you want to
hear on this screen, touch "Others" and enter
a language code. For the entry of language
code, see the following "ENTER LANGUAGE
CODE".
_
Subtitle language
You can change the subtitle language.
1. Touch "Subtitle Lang.".
2. Touch a language you want to read on
the "Select Subtitle Lang." screen.
AUDIO SYSTEM
If you cannot find the language you want to
read on this screen, touch "Others" and enter
a language code. For the entry of language
code, see the following "ENTER LANGUAGE
CODE".
To return to the "Setup Menu 1" screen, touch
the "Back" switch.
_
DVD language
You can change the language on the DVD
video menu.
1. Touch "DVD Language".
2. Touch the language you want to read
on the "Select DVD Language" screen.
If you cannot find the language you want to
read on this screen, touch "Others" and enter
a language code. For the entry of language
code, see the following "ENTER LANGUAGE
CODE".
To return to the "Setup Menu 1" screen, touch
the "Back" switch.
_
Angle mark
The multi-angle mark can be turned on or
off on the screen while the disc which is
multi-angle compatible is being played.
Each time you touch "Angle Mark", the
angle mark on the screen turns on or off al-
ternately.
_
Parental lock
The level of viewer restrictions can be
changed.
V
133