When the garage door opener transmitter
is properly installed, you can operate the
transmitter by pushing the center panel of
the cover.
324
'05 TUNDRA_U (L/O 0409)
If the center panel does not contact your
garage door opener transmitter:
A
Check to see if spacer is on the cor-
rect pin.
A
Attach another spacer to the top of
original spacer. Check operation. If re-
quired, continue to add spacers until
contact is achieved.
If the transmitter is clattering during driv-
ing, fill in a piece of felt or pad to prevent
the transmitter from clattering.
CAUTION
A
To reduce the chance of injury in
case of an accident or a sudden
stop, always keep the garage door
opener box closed while driving.
A
Keep the remaining spacers away
from children.
2005 TUNDRA from Sep. '04 Prod. (OM34432U)