Area To Avoid - Toyota TUNDRA-2005 Owner's Manual

Area to avoid

Areas you wish to avoid because of traffic
jams, construction work or other reasons
can be registered as areas to avoid.
"MENU"
Push the button to display the
"Menu" screen and then touch the
Places"
switch to display the following
screen.
INFORMATION
If a destination is inputted in the area to
avoid or the route calculation cannot be
made without running through the area
to avoid, a route passing through the
area to avoid may be shown.
(a) Registering area to avoid
"Register"
1. Touch the
"Areas to avoid".
"My
2. Enter the location in the same way as
inputting a destination, or display the map
of the area you wish to avoid. (See page
20.)
INFORMATION
Up to 10 locations can be registered as
point/area to avoid. If there are 10 loca-
tions already registered, the message
"Unable to register additional points.
Perform operation again after deleting
unnecessary points." appears on the
screen.
switch of the
3. Set the cursor in the center of the area
to avoid, and touch the
ADVANCED FUNCTIONS
"Enter"
switch.
73