Seat Heaters - Toyota TUNDRA-2005 Owner's Manual

Table of Contents

Advertisement

Separate seat
To use the armrest, do this.
Non- split and split bench seat—Pull the
armrest out as shown in the illustration.
Separate seat—Pull the armrest down as
shown in the illustration.
NOTICE
To prevent damage to the armrest,
avoid putting heavy loads on it.
58
'05 TUNDRA_U (L/O 0409)

Seat heaters

To turn on the seat heater, push the
switch ("L" switch for the left front
seat and "R" switch for the right seat).
At this time, the indicator light will illu-
minate to indicate the seat heater is
operating.
The seat heater switches have the follow-
ing positions.
"HI"—High heating temperature
"LO"—Low heating temperature
The key must be in the "ON" position to
operate seat heaters.
Pushing lightly on the opposite side will
turn it off.
CAUTION
Occupants must use caution when op-
erating the seat heater because it
may make them feel too hot or cause
burns at low temperatures (erythema,
varicella). Use extra caution for;
"
Babies, small children, elderly per-
sons, sick persons or persons with
physical disabilities
"
Persons who have delicate skin
"
Persons who are exhausted
"
Person who have taken alcohol or
drugs which induce sleep (sleeping
drug, cold remedy, etc.)
To prevent the seat overheating, do
not use the seat heater with a blan-
ket, cushion, or other insulating ob-
jects which cover the seat.
2005 TUNDRA from Sep. '04 Prod. (OM34432U)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents